Electronics Forum | Tue Nov 20 06:19:42 EST 2007 | kircchoffs
just add FIP2 in fujiflexa when you are adding machine at factory lines. if you are connected just receive the proper data from the machine and re-transmit the proper data.
Electronics Forum | Mon May 01 05:47:29 EDT 2006 | aj
Hi, Did you sell the PC that you had Flexa Installed on as part of the package? If so , you should have no problems. Fuji should just send the updates directly to the new customer. If there is a fee for this so be it , its not your problem.( in hind
Electronics Forum | Wed Feb 20 21:23:38 EST 2008 | daxman
you can purchase a license from Fuji to be able to directly import CAD data. It's the fastest and most accurate way that I am aware of. Also, it gives you the option to import the board outline as well as layers of the CAD so that you can see the s
Electronics Forum | Mon Jul 15 09:42:49 EDT 2019 | mleclair
I purchased some RS232 breakout board connectors so I'm making the cables now based on the pinout document page 4 (DB9 to DB25) but i'm still getting the message below: "unable to transmit to machine 61700025 Unable to log on to the Machine Communic
Electronics Forum | Fri Dec 21 00:06:55 EST 2007 | nhantruong
If you want to use fuji CP6 machine, you have to buy the the fuji flexa software.Because the old software from fuji (MCS or F4G) they are not support anymore. In the flexa software you can make top and bottom side in the same program, you can move th
Electronics Forum | Fri Sep 19 11:59:57 EDT 2008 | john_smith
Ralph, Is this problem related to all product or is it product specific? You may need to change the fiducial data in the program. I am not familiar with flexa but have some knowledge with MCS30.
Electronics Forum | Tue Feb 19 13:25:29 EST 2008 | vikkaraja
What other mehtods are used to make a FUJI programs using FLEXA Software? Simplest way I know is to get a text file with the followings:Part#;X-axis; Y-axis; and Referance Location. Thank You.
Electronics Forum | Tue Mar 17 19:39:48 EDT 2009 | dman97
Never mind. I figured it out. It seems that the part numbers I assigned were too long. I shortened them to 15 characters and it worked. I find it strange that the p/n's were too long, but Flexa did not catch this as an error, and instead proceede
Electronics Forum | Wed May 27 16:39:33 EDT 2009 | rmitchell
Hi, I think vision 20 will work as well. If not we have used 100 or 105. Have you tried placing the part with the machine trace on? If so is it finding all the leads? any error codes? If you are defining the leads in the EL lead data I would not d
Electronics Forum | Thu Nov 01 21:44:32 EDT 2007 | daxman
Sorry everyone...you all seem to be fond of the MyData machines. I just had to make a comment. We had a TP9 for about 2 years. It rarely got used because of the terrible programming interface..When compared to Fuji Flexa and Fuji machines, we reall