Electronics Forum | Tue Jul 17 15:26:08 EDT 2012 | kruzer
Hi I use CP4, CP6, CP643, GLV and NXT, but i have a problem with CPIV, i cant use It with Director Fuji Flexa. i use snifer rs232 (rs232mon) to resolve problem and what i know: Computer send on rs232 to machine (every 1 min or something): vQN2105
Electronics Forum | Sun Nov 04 01:11:19 EST 2007 | daxman
If we're comparing a TP9 or a MY9 to anything FUJI, I think the IP3 has it beat by a long shot. You can get a used IP3 with an MTU for under 35k. The only downside is that you require a programming interface with Fuji and it's built into the MyData.
Electronics Forum | Mon Aug 02 12:28:16 EDT 2004 | jbabson1
The speed control for the extend and retract is in the Part Data under Process data under MTU. John
Electronics Forum | Mon Nov 22 09:31:29 EST 2004 | cyber_wolf
We have tried the vision both ways. Leads/body. Same issue. FYI Ken : The parts were not hitting the feeder pan on the back of the machine. I know this sounds really weird, but it seems that when we generate a program from Flexa(as opposed to FujiC
Electronics Forum | Thu Oct 23 12:26:51 EDT 2003 | eugenecjr
burguj, Please let me give you some incite to the problem that you have. This issue will depend on the version of Flexa that you are running. Since I am not sure of your name and company I will just say that if you are running the latest version t
Electronics Forum | Tue Dec 06 19:44:10 EST 2011 | comando
Hello every one! I need help with a misaligned theta at plcc44, the machine is a IP3 smd3, firmware 2.99, vision card 4400 and both camera type YD2048N on label but in Proper data is set 2 (I don't know if this is right) we use Fuji flexa, Back Lig
Electronics Forum | Thu Jan 07 03:26:58 EST 2016 | sarason
My program PCBSynergy generates over 80 SMT formats. Unfortunately it only does the Siemens *.NC format at the moment. If you send me a copy of the format and the CAD file or the XYR file in a spreadsheet, which generated it. I can easily add it, esp
Electronics Forum | Fri Oct 17 20:26:21 EDT 2008 | diesel_1t
If is IP-1, is using SMD2 vision instead of SMD3 (CPIV-IP3, CP6,7, etc) if so, you must use Vision Number instead of Vision type... if you're using fuji flexa just press F1 on vision number and you will se most common vision numbers depending on shap
Electronics Forum | Wed May 26 05:58:50 EDT 2010 | chrislyttle
Hi, first time posting on here. We've recently acquired additional Fuji machines to add to our line and have moved premises to a new factory. I've been trying to set up a new factory line in Line Editor to use two of our existing machines (Fuji GSP
Electronics Forum | Thu Mar 14 17:28:35 EST 2002 | stepheno
I worked with Fuji CP6 where one of the techs wanted a minimum of part data's. He was used to working with panasonic machines. We would get resistors broken in two if the part data was too small and parts flying off the board if the part data was t