Electronics Forum | Wed Jul 15 10:37:58 EDT 1998 | Ben Salisbury
| | We just have a use cp4 .I have a problem on transfering data between cp3 to cp4 .when I use the data for cp4 I can't have parts in correct location. Is that normal? or it's because that has a different vision system.if so.how can i do with it.the
Electronics Forum | Fri Jul 19 11:02:15 EDT 2019 | dman97
You never answered my question on the proper data. Do you have a hard copy of the proper data? Is the diskette (if you have it) in Fuji Flexa format? In order for flexa to communicate with the CP6, you must have the correct proper data.
Electronics Forum | Tue Jul 02 10:37:36 EDT 2019 | dman97
I also forgot to add that if the proper data was not generated by flexa for the CP6, then flexa will not communicate with the machine. You need to flush the proper and resend using flexa for the communications to work correcty. Good luck!
Electronics Forum | Fri Jul 19 11:11:38 EDT 2019 | dman97
Have you imported the proper data into flexa yet?
Electronics Forum | Sun Apr 30 16:56:22 EDT 2006 | mrduckmann2000
I am sure that Fuji will transfer the ownership, it will cost some money but they will do it. I have been with a company that has had to transfer Panasonic equipment to 3 different owners over the last several years. It cost approx $10k to do the t
Electronics Forum | Wed Jun 04 13:10:34 EDT 2008 | daxman
Hi James, What version of Flexa are you using? If you are using 2.x, if I remember correctly, the licensing was tied to your computers mac address. If you transferred Flexa to another PC or re-installed windows it was complicated to get it working.
Electronics Forum | Thu Apr 27 19:19:26 EDT 2006 | ____
nobody know? Nobody cares. You need to contact the Fuji office that will handle the new location of the machine. FLEXA is a piece of software. Good luck getting it transfered.
Electronics Forum | Mon May 01 14:12:27 EDT 2006 | bvdb
"to transfer Panasonic equipment to 3 different owners over the last several years. It cost approx $10k to do the transfer each TIME." Wow - $10K just to transfer a software license! Good enough reason not to purchase Panasonic gear in my opinion.
Electronics Forum | Thu Jul 21 01:29:07 EDT 2005 | matjen
We are using Fuji-Flexa software and we are not sure where to go in the software to check the proper data. If anyone has Fuji-Flexa software and could direct us in the right direction please let me know. Thanks.
Electronics Forum | Wed Jul 18 00:35:13 EDT 2012 | fujiphil
If you have the backup files for your program and proper. Try to flush-out the machine memory. Then try again to report CP4 to flexa. If the reporting went good, the communication must be ok. Resend the proper and program.
winsouce.jpg)
