Electronics Forum | Tue May 25 22:34:22 EDT 2021 | hgurusamy
Hi, wondering if anyone knows what is the difference between the Fuji Host Interface and the FujiFlexa User Host Interface. We are trying to purchase the Host Interface v6.28 in order to pull data from the NXT machine into our system but the Fuji re
Electronics Forum | Fri Jun 11 01:54:47 EDT 2021 | sophyluo1985
Hi,Helena,We have helped you to check, this thing should be an encryption key (similar to a U disk) or a software. We asked the FUJI engineer
Electronics Forum | Thu Jun 10 18:33:05 EDT 2021 | kojotssss
Hi, Maybe you mean NXT versions? (application versions for nxt modules, accessory etc..?)
Electronics Forum | Fri Apr 07 09:26:36 EDT 2006 | engguy
This is common with older Fujis. The machine is trying to download production data to the host(MCS?) If the cable is not connected or if the MCS is off, the machine will randomly freeze at the end of prod. Either solve those issues or change the m
Electronics Forum | Wed Sep 17 05:18:55 EDT 2008 | ralphspm
Our Fuji IP2 has a problem reading fiducial marks.It finds the mark(is shown on console display) but after time gives out the error statement "image display time over".It gives out an error status code of "FFFC" on the console display.Cannot find any
Electronics Forum | Thu Dec 20 12:14:37 EST 2012 | dhopps
If you go with MCS I would recommend using an MCS30. You would have to make sure that the E-Proms for host communication are installed in the MCS and the host module (software)as well. You would then need CadConvert to program and transfer programs
Electronics Forum | Thu Mar 12 00:32:12 EDT 2015 | mdang
I am setting Fuji Flexa to communicate with CP8 machine. When I create a new machine, I has to fill out the following value Machine Communication Server: ? Get Production Data : (yes/no) GEM Host Name: ? Disable GEM : (Yes/no) TCP/IP Port #: ? I c
Electronics Forum | Wed Jul 08 00:16:30 EDT 2009 | magnifico
Hi Daxman I have the F4G installed in a host PC. I would like a summarized procedure (e.g. step 1, step 2, etc)on how to program, as reading from the manual is taking time. This could get me started faster. Appreciate any inputs. Thanks
Electronics Forum | Fri Mar 13 10:24:35 EDT 2015 | assuredtech
I am setting Fuji Flexa to communicate with CP8 > machine. When I create a new machine, I has to > fill out the following value Machine > Communication Server: ? Get Production Data : > (yes/no) GEM Host Name: ? Disable GEM : > (Yes/no) TCP/IP
Electronics Forum | Fri Nov 22 10:18:33 EST 2002 | Joaquin Rodenas
Dear Mr. Liang I'm a service ingeneer in a distributor of FUJI products. My first suggestion is get some help from the FUJI dealer in your territory, but anyway try the following: First of all, check again the FTP tool included in F4G-main windows
.png)
