Electronics Forum | Thu Mar 03 17:41:41 EST 2016 | travishemen
That is a Hover Davis feeder. We use them on our Fuji IP3s and a Universal GSM, they work great. Check them out at http://www.hoverdavis.com/
Electronics Forum | Mon Aug 08 15:47:15 EDT 2016 | jdengler
You may be able to get the specs from one of the used equipment companies that advertise here. Jerry
Electronics Forum | Mon Jul 04 13:43:38 EDT 2022 | richardcargill
is it a specific part you're having the problem with, or does the fault manifest on a number of different ones ?
Electronics Forum | Mon Jul 04 13:56:23 EDT 2022 | madisreivik
Actually its one part. I had an idea to test some completely different, pre-defined component which has been placed on that machine before. Do You suspect there is a diabolical shape parameter somewhere ? :)
Electronics Forum | Tue Jun 20 21:42:19 EDT 2023 | jdengler
The MTU has it's own proper data file. You need to send that to the MTU.
Electronics Forum | Wed Jun 21 06:10:36 EDT 2023 | madisreivik
Thanks ! I totally forgot that MTU had its own prop file, uploaded it from Flexa and now works fine.
Electronics Forum | Sat Jun 24 13:08:09 EDT 2023 | madisreivik
All is OK now. The machine was offline couple months and probably some memory battery is dead. All problems were solved after uploading prop data to IP and MTU.
Electronics Forum | Fri Jan 05 18:39:49 EST 2024 | madisreivik
Also, sometimes placing heads "skip" some rotation - component is little skewed on board but vision shows "correct" numbers. Probably some mechanical error ?
Electronics Forum | Wed Jan 10 21:03:02 EST 2024 | madisreivik
Vision error found: YOU MUST CHANGE LAMPS SOMETIMES ! Also, the camera front-glass (with the cutout) must be correctly positioned :) Still looking the Q error on left head. Probably mechanical problem...
Electronics Forum | Fri Jan 12 15:32:53 EST 2024 | madisreivik
Indeed I found some vacuum problems, one replaced small hose was not fitted correctly. Lets see if that helps :) Great thanks ! Also, Travis, do you have any information how to adjust the milk-plexiglass slitted covers on line scan cameras ?
