Electronics Forum | Tue Oct 26 10:10:03 EDT 2010 | kapa
We are currently using Mydata (12 and 15) and are now looking at Fuji CP-743 and IP-3, what quality expectation can I have? I am looking for First Pass Yield data from your production with CP-743 and IP-3 machines. Please state type of products you p
Electronics Forum | Mon Sep 04 10:20:52 EDT 2000 | JOHN
Hi A better method wolud be to use a belt feeder the reason being the vibratory feeders tend to blow mfu signal ports I believe you can retrofit your machine to take the BGA also if the bga has no matrix pattern in the centre there is no re
Electronics Forum | Wed Apr 24 07:44:35 EDT 2002 | jax
I would check your machine. Often times you purchase IP3's with two different camera's, to accomodate a wider range of components. This might be what you are running into. Questions: What is the size, color, etc.. of your component? Setting for each
Electronics Forum | Wed Aug 03 11:07:29 EDT 2011 | cyber_wolf
IP3 camera calibration requires someone that knows what's going on to do it. Unless you have been trained on this specifically I would recommend that you don't attempt it by yourself. I believe the button jig is used for squaring the camera up. You
Electronics Forum | Fri May 02 14:11:13 EDT 2014 | comandorobles176
We recived a used IP3 and don't have NG parts conveyor and I want to set the proper to discard component only in ng parts discard box.I think is in "Machine_ID" but I don't know how, we have Fuji Flexa sofware. any help?
Electronics Forum | Thu Mar 04 22:37:58 EST 1999 | Larry Johnson
Does anyone out there have any information on this new "Fuji Motor Feeder" Price and how it compares to Hover-Davis. I should specify feeders for an Fuji IP-3. Any information would be great. Thanks Larry
Electronics Forum | Mon Mar 08 11:54:38 EST 1999 | Bob Schuster
| Does anyone out there have any information on this new "Fuji Motor Feeder" Price and how it compares to Hover-Davis. I should specify feeders for an Fuji IP-3. Any information would be great. Thanks Larry |
Electronics Forum | Mon May 10 17:21:03 EDT 2004 | smt..
I work with Fuji equipment For over 10yrs�. Cp3, cp4.cp6.cp7, ip1, ip2, ip3, qp341, qp242, qp351. Also, work with MYDATA, SAMSUN, and QUAD AMISTAR�. Fuji is the best in my opinion.
Electronics Forum | Mon May 10 17:21:08 EDT 2004 | smt..
I work with Fuji equipment For over 10yrs�. Cp3, cp4.cp6.cp7, ip1, ip2, ip3, qp341, qp242, qp351. Also, work with MYDATA, SAMSUN, and QUAD AMISTAR�. Fuji is the best in my opinion.
Electronics Forum | Tue Nov 30 08:24:42 EST 2004 | jdengler
If you have never calibrated a Fuji IP machine before I would highly recommend getting Fuji, or an independent contractor to do this. Even with the instructions there are a few tricky parts.
.png)