Electronics Forum | Mon Aug 22 08:09:51 EDT 2005 | cyber_wolf
The only time I have seen any Fuji IP need calibration is if you have had a serious crash, or if an axis or camera has been removed. Make sure you don't have something else going on. For instance check these things: 1.Check nozzle vacuum 2.Make sur
Electronics Forum | Fri Oct 17 20:26:21 EDT 2008 | diesel_1t
If is IP-1, is using SMD2 vision instead of SMD3 (CPIV-IP3, CP6,7, etc) if so, you must use Vision Number instead of Vision type... if you're using fuji flexa just press F1 on vision number and you will se most common vision numbers depending on shap
Electronics Forum | Thu Mar 07 09:03:03 EST 2002 | cabjerk
After the IP3 is stopped by any means ie. Estop, cycle stop, or machine runs out of parts, upon restart the table will go to load position, unclamp, reclamp, read the fids and then proceed as normal. The problem is that if we already have fine pitch
Electronics Forum | Tue Jul 05 07:16:35 EDT 2022 | madisreivik
The problem is that.. 1) it always drops at the same location and the vacuum led shows that machine indeed turns the vacuum off ! 2) the same nozzle picks up much heavier components from other feeders without problems 3) the MTU component - i turn
Electronics Forum | Wed Apr 28 00:58:22 EDT 1999 | Will B. Caught
| Recently, we have been having problems with PLCC's passing vision on our IP's If the part is set up to be placed on Head 2, it will not always pass vision. However, if we move it over to Head 1, it will pass and place just fine. Now, I do realiz
Electronics Forum | Tue Nov 25 10:46:19 EST 2014 | dph150
Hello, I had my flexa computer died I got a new computer a 4 port digi port usb to DB9. I have a CP743 that I can talk to just fine (It uses RJ45 connection). I can not talk to either one of my IP3 or my CP4 I get a nickname error when I try to p
Electronics Forum | Tue Jul 05 07:02:26 EDT 2022 | richardcargill
Possibly, yeah. Or the wrong sized nozzle ( or chipped or blocked ) We have problems occasionally with larger components and vacuum levels. If the component has a makers 'circular void' on the pick up surface then the actual pick coordinates have to
Electronics Forum | Fri Jun 02 17:19:56 EDT 2000 | Big K
I am currently experiencing several problems with QFP's on one of our IP3's. The first problem is with QFP240 devices. We are experiencing a high reject rate with these parts when using vision type 100. What appears to happen is that the vision syste
Electronics Forum | Mon Aug 15 06:17:47 EDT 2005 | md
All, I have a very annoying problem with the FIP3 machine. A while ago i had an issue with 2 sensors (only!) basically they were not sensong boards etc. when I checked the voltage I had 12 volts on the GB line which should have been 0v. This proble
Electronics Forum | Wed Sep 16 16:03:36 EDT 1998 | Ben Salisbury
| | | Has anyone used Fuji's rubber tip nozzles for the IP3? Are they O-ring type or suction cup? I'm having trouble picking up Ompacs due to the top of the part not consistently being flat. Any actual experience with these $1100 nozzles would be a