Electronics Forum | Wed Apr 24 10:32:47 EDT 2002 | dougt
BGA's are sometimes difficult for a camera to recogonize as your not looking for the dark outline of a part with white lighting behind it but rather the white balls with in that dark component. If you don't mind experimenting a little I would play wi
Electronics Forum | Mon Oct 10 15:24:15 EDT 2005 | zl3vlf
Hello to all! Our Fuji FIP-3 placement machine has come up with a servo alarm (X2-axis) whenever we try to run the machine. The manuals don't go into a lot of detail as to the cause of this problem, but there is plenty of information on what the X2
Electronics Forum | Tue Jul 05 17:09:40 EDT 2022 | madisreivik
PROBLEM SOLVED :) ! I messed with parameters, then started to check hardware again. and.... There are 2 transport position on the carrier 1) vacuum 2) mech clamp Both have fiber position sensor which shows the status When there is component, the
Electronics Forum | Mon Jun 05 22:40:40 EDT 2000 | Dean
...well, if I had Fuji in on 4 occasions and the problem is not resolved I would wonder what exactly I paid for... Here is what I would do. 1. Run the glass plate program. This will eliminate variables in your production parts and boards. Additi
Electronics Forum | Sat May 29 22:20:56 EDT 1999 | Earl Moon
| | Is it possible to place parts that do not have leadframes exposed when looking from the top side of the part such as BGA's using a Fuji IP1 with a SMD1 vision (Binary) system. I realize that the IP1 does not have front lighting but according to a
Electronics Forum | Fri Jun 14 13:19:15 EDT 2002 | mjabure
The first question is, is this a high mix, low volume environment or vice versa? If it's the former then Kens solution is something you might want to look into. Depending on your feeder set up you might check to see if your operators have been traine
Electronics Forum | Wed Jun 04 10:49:23 EDT 2008 | arbarr
The the HDD onwindows 2000 pc running Fuji Flexa for 5 m/c's on our smt assembly line died 2 weeks ago. We've since reinstalled a new HDD. To cut along story short Fuji via their agent here (Productivity Partners Formerly Astro) after 14 days do
Electronics Forum | Mon Mar 03 12:25:37 EST 2008 | daxman
The problem was first noticed while doing a nozzle center. The wide angle camera would not display an image. After rebooting the machine (sometimes it took several tries) the camera would work. A few months later, the wide camera would not boot at a
Electronics Forum | Thu Jun 05 17:54:42 EDT 2008 | iantech
The the HDD onwindows 2000 pc running Fuji Flexa > for 5 m/c's on our smt assembly line died 2 weeks > ago. We've since reinstalled a new HDD. To cut > along story short Fuji via their agent here > (Productivity Partners Formerly Astro) after
Electronics Forum | Sun May 30 11:43:23 EDT 1999 | M Cox
| | | Is it possible to place parts that do not have leadframes exposed when looking from the top side of the part such as BGA's using a Fuji IP1 with a SMD1 vision (Binary) system. I realize that the IP1 does not have front lighting but according to
