Electronics Forum | Tue Aug 24 17:47:50 EDT 2010 | smtmax
I'm looking for CP6 fuji feeder. 16mm x 12mm (KO=8.3mm) 24mm x 20mm (KO=10.9mm) Please help! Thanks!
Electronics Forum | Mon May 28 22:39:20 EDT 2007 | fazan83
Guys please help. Does anybody know what is the length of the empty components space in tape and reel that we need to provide for the Fuji NXT feeders to enable the FUji NXT placement? Please give me spec for 8mm, 12mm feeders and ETC. ALso if som
Electronics Forum | Thu Oct 04 00:01:59 EDT 2018 | gaintstar
Flason SMT FUJI Pick and Place Machine: http://www.flason-smt.com/product/FUJI-Chip-Mounter-SMT-spare-parts-A10395-Fiber-Amplifier.html http://www.flason-smt.com/product/FUJI-Chip-Mounter-SMT-spare-parts-Amplifier-A1038t.html http://www.flason-smt.co
Electronics Forum | Mon May 12 15:08:11 EDT 2003 | stefwitt
1. Not quite. The width of 16 mm came most likely from the reel width, which can be up to 15 mm wide for the 8 mm tape. The reel for the 12 mm tape is up to 18 mm wide and would occupy already two slots. If you design a machine from scratch, I would
Electronics Forum | Tue Sep 14 18:19:53 EDT 1999 | Mark Deren
| | Is it possible to place 0402 components with a Fuji CP2? How about a CP4? What are the suggestions for 0402 machine placement? | | | | Any help would be appreciated. According to the latest Fuji America S.M.T. Report I have, 0402 (1005) compo
Electronics Forum | Tue Apr 14 11:43:30 EDT 2009 | rmitchell
Hi, We are considering adding on to our SMT line. Our current line is CP65, IP3 and we would like better placement on our 0402's and 0201's. We were looking at the NXT, we would need larger pcb table to match our other machines. We probably only nee
Electronics Forum | Fri Jul 02 07:55:52 EDT 1999 | Earl Moon
50% reduction in time. One draw back, the availability of feeders... You need 280 feeders max to change over a max capacity of 140 feeder machine (or a variance of a product mix vs. part numbers); then there's 8mm, 12mm, 16mm, sticks feeders that c
Electronics Forum | Wed Nov 18 17:18:59 EST 1998 | Tom
| My company is now using Fuji SMT machine, and is now considering to purchase QP132. Appreciate if sone one let me know about QP132's capability, relaiability and atability on the production. And what is advantages conpared to Philips FCM. | |Other
Electronics Forum | Fri Feb 11 16:11:52 EST 2005 | Grant
Hi, Your right, and that's the thing I liked about MYDATA, even though we are selling ours now, and putting in Fuji'. I would still by a MYDATA if I was starting again, and doing low volume. When we started we kept our first product as simple as po
Electronics Forum | Sat Jul 03 13:49:36 EDT 1999 | JohnW
50% reduction in time. One draw back, the availability of feeders... You need 280 feeders max to change over a max capacity of 140 feeder machine (or a variance of a product mix vs. part numbers); then there's 8mm, 12mm, 16mm, sticks feeders that c
.gif)
winsouce.jpg)