Electronics Forum | Thu Nov 13 13:12:57 EST 2014 | jimmyboz
Are you using MCS1 or MCS2 software on the MCS16? For MCS1 I would have to try and remember, haven't seen that software in 20 years. For MCS2 in the PD make sure nozzle size, nozzle size min, and nozzle size max are all set to Med.
Electronics Forum | Sat Oct 02 13:55:01 EDT 2010 | wingding
I have recently started working on FUJI IP2s and CP3s, and I need information on the MCS2 system. Anything on keyboard shortcuts or possibly where I can find any manuals on MCS2 would be helpful. And no, I don’t work in a museum.
Electronics Forum | Thu Feb 04 13:31:58 EST 1999 | E.
Any thoughts from FUJI users on the likes and dislikes (pros and cons) of MCS vs. F4G , and vice versa? Likewise, are there any "FujiCAM" users out there who would like to comment as well? Thanks.
Electronics Forum | Mon Mar 16 13:27:36 EDT 2015 | swiese242
Call Fuji America. They should be able to help. Let them know if someone has already set these passwords as well. Mcs or flexa...hope that helps. 847-821-2400
Electronics Forum | Mon Oct 04 15:23:39 EDT 2010 | jdengler
A few years ago I was able to buy a MCS-2 programming manual from Fuji America. You may want to contact them and see if they have any left. Jerry
Electronics Forum | Sat Sep 25 09:38:41 EDT 1999 | Steve E ( Fuji America )
| What is the command string used to download updated software | from floppy discs to the mcs16b controller? | Well Eric it depends on what your doing. If your just updating the MCS software, start out at the first screen ( UCI screen ) Go to System
Electronics Forum | Tue Sep 28 13:58:16 EDT 1999 | Eric Lee Williams
| | What is the command string used to download updated software | | from floppy discs to the mcs16b controller? | | | Well Eric it depends on what your doing. If your just updating | the MCS software, start out at the first screen ( UCI screen ) |
Electronics Forum | Thu Dec 20 12:14:37 EST 2012 | dhopps
If you go with MCS I would recommend using an MCS30. You would have to make sure that the E-Proms for host communication are installed in the MCS and the host module (software)as well. You would then need CadConvert to program and transfer programs
Electronics Forum | Mon Oct 11 17:15:03 EDT 1999 | Mike H
| Just curious as to everyones thoughts on if you could chose to use F4G or an MCS-30. Which would you chose and why? | | | Larry J | |Larry, depending to your Fuji machines, if you are using any new machines like QP1 or QP2 and any other ones li
Electronics Forum | Wed Feb 10 02:09:07 EST 1999 | zeek
| Any thoughts from FUJI users on the likes and dislikes (pros and cons) of MCS vs. F4G , and vice versa? | | Likewise, are there any "FujiCAM" users out there who would like to comment as well? | | Thanks. | We have had some experience with both
