Electronics Forum | Thu Sep 15 18:02:52 EDT 2005 | GAK
If the end sensor is bad it will cause the axis to past it and travel against the end stop and cause an over current also. So it kind of depends on what the machine is trying to do.
Electronics Forum | Fri Dec 21 09:40:40 EST 2018 | kdexter0928
I am at wits end with this machine. The MTU on my IP2 will not zero set. It gives me a few different errors depending on its mood. I receive MTU T- OT, MTU X- OT, or MTU Y- OT. when the machine attempts to zero set it travels until it OTs. I have tri
Electronics Forum | Wed Jan 02 10:20:10 EST 2019 | jdengler
Sorry, I looked at an IP-3 not 2. It looks like for the IP2 they bundle the MTU and machine proper together so it should be sending the data when you transmit the one file. Do the axis travel in the correct direction? If yes the only thing I can
Electronics Forum | Wed Jan 02 10:31:40 EST 2019 | kdexter0928
Not a problem! I appreciate all the help! They all travel in the correct directions. Do you know which input card I should be looking at to check the range switches?
Electronics Forum | Thu Sep 15 10:25:13 EDT 2005 | lyrtech
Hi, this morning we got a "servo alarm MTU" on our FUJI IP-2. On a servopack, I see an " Over Current" error. what does it mean? I don't know hoe to check that. Can anyone help me? Thanks a lot.
Electronics Forum | Thu Sep 15 16:02:20 EDT 2005 | jdengler
Over Current means the motor is drawling too much current. Check for a jam on that axis, bad wire, bad motor, bad servo amp (yes the amp can go bad and make it appear that the motor is drawling too much current). Jerry
Electronics Forum | Thu Oct 29 01:21:38 EST 1998 | Erhard
Thinking about that 180� turn unit again: You wouldn't require the the y-movement. The fixed side gets turned over to the other side anyways. | My suggestion would also be to leave the Fuji direction the way it is. (It's more standard anyways?) and
Electronics Forum | Thu Jun 12 08:57:32 EDT 2014 | sargeredarmy01
Hello Everyone, I will try to keep this short and sweet while explaining the best I can. I have a Fuji IP-II that I have been working on trying to correct some issues that the previous operator caused. Over the last month or so I have been working
Electronics Forum | Fri Jul 23 12:49:47 EDT 1999 | Tony
| There is a practise within the industry of an Inspector inspecting a board, and that same Inspector performing touch-up. My opinion is that the Inspection and Touch-up operations should be separate functions whereby the Inspector is not performing
Electronics Forum | Tue May 25 20:29:41 EDT 2004 | Grant
Hi, That's the interesting point, and I think it's got to do with the design of the placement. You have 8 pick heads in the Hydra head, and they all line up with a tape in the feeder. So in theory when it can pick all 8 components at once, and the
