Electronics Forum | Thu Oct 04 00:01:59 EDT 2018 | gaintstar
Flason SMT FUJI Pick and Place Machine: http://www.flason-smt.com/product/FUJI-Chip-Mounter-SMT-spare-parts-A10395-Fiber-Amplifier.html http://www.flason-smt.com/product/FUJI-Chip-Mounter-SMT-spare-parts-Amplifier-A1038t.html http://www.flason-smt.co
Electronics Forum | Fri Apr 23 07:10:04 EDT 2004 | pjc
Use CP4 feeder, 0.7mm nozzle and upgrade vacuum to higher power.
Electronics Forum | Fri Dec 15 02:32:12 EST 2000 | PeteC
Ian, The vision should recognize it; given you've got the correct Part Data. To run 0402 effectively with a CP3 you need: 1. A good, I mean real good, CP4 style feeder for 0402 (1005) 2. 0.7mm nozzles (get from second-source supplier such as WT in
Electronics Forum | Fri Feb 01 09:34:54 EST 2008 | jdengler
In the PD for 0603 I have a min size of 0.7mm and a max size of 1.0mm and the CP4 size at 0.0mm. This way when you have 1.0mm nozzles in the machine it will use that and when you change them to 0.7mm it will use that. Both sizes work OK. -Jerry
Electronics Forum | Fri Feb 01 09:20:44 EST 2008 | aj
Thanks for reply, So do you use 1.3 or the 0.7 nozzle for 0603 components ( I suppose trial & error will tell me). aj...
Electronics Forum | Fri Jul 09 23:45:22 EDT 2010 | dman97
I have a CP642 machine that always gives me a Station 17 or Station 19 nozzle error when the machine selects the 2.5mm 3.7mm or 5.0mm nozzles. It always throws an unknown nozzle station 17 error after all the heads have switched to the above mention
Electronics Forum | Fri Feb 01 05:42:21 EST 2008 | aj
Hi all, Is anyone out there placing 0402 with a CP4? Not sure how reliable it would be and also how do work around the nozzle setup ? we currently have 2.5mm ,1.3mm & 1.0mm so do you remove say 6 x 2.5mm and put in 0.7mm. Any replies appreciated.
Electronics Forum | Thu Mar 01 16:39:29 EST 2012 | triadelectronics
Our company is going to attempt to place 0201 components using our Fuji CP4-3 with the upgraded SMD3 vision system. Count On Tools is providing the 0.4 mm nozzles and we are using our 8mmX2mm feeders with the 0.7mm tape leaf (if it works at all we w
Electronics Forum | Wed Apr 28 17:41:44 EDT 2004 | longpham246
Hello! We placed quite a few of 0402 with our CP3 using 0.7mm nozzle with the same feeder as you had. Pick up can be adjust and calibrated, but that is not the problem, I agreed with you on that part. The trick is you have adjust and play around wi
Electronics Forum | Fri Feb 01 08:40:12 EST 2008 | jdengler
Hi AJ, Change ALL 12 of the 1.0mm to 0.7mm. The CP 4 can only set nozzle size for S M and L not some of the 12 but all 12. 0402 usually come in 8 x 2 mm tape so you need 8 x 2 feeders or you will waste 1 component for every component you use. T
