Electronics Forum | Fri Oct 03 07:49:19 EDT 2008 | grantp
Hi, I just saw the new NXT machines at globaltronics in Singapore, and mostly they are faster. However what was interesting is Fuji shows a prototype of the new XPF machine, but it was called XPF-W which handles really large PCB's and uses the sam
Electronics Forum | Thu Mar 07 06:20:36 EST 2002 | HCC
Hi y'all, I know this could be sensitive information, but can I just start up a benchmarking sharing on the missing component rate in Fuji CP742 chipshooter? We've been seeing quite a few missing RLC components, and even some components that end up
Electronics Forum | Thu Mar 07 09:46:36 EST 2002 | cfraser
If you are having problems with missing, misplaced RLC on your Fuji CP you should take a look at your board supports in the machine. Lack of or improper board support and bad feeders are the most common causes of misplaced RLC's.
Electronics Forum | Thu Mar 14 17:28:35 EST 2002 | stepheno
I worked with Fuji CP6 where one of the techs wanted a minimum of part data's. He was used to working with panasonic machines. We would get resistors broken in two if the part data was too small and parts flying off the board if the part data was t
Electronics Forum | Tue Apr 10 11:14:57 EDT 2007 | Scotceltic
I agree. We use Bartector. It is a very cost-effective solution to do what you need. It can hook up to all Fuji equipment including the new NXT.
Electronics Forum | Mon May 28 22:39:20 EDT 2007 | fazan83
Guys please help. Does anybody know what is the length of the empty components space in tape and reel that we need to provide for the Fuji NXT feeders to enable the FUji NXT placement? Please give me spec for 8mm, 12mm feeders and ETC. ALso if som
Electronics Forum | Tue Apr 10 13:16:29 EDT 2018 | dleeper
Given your low component count, why are you considering the Fuji AIMEX over a Fuji NXT? I don't know the specifics of your product, but in general, the AIMEX is geared more for high mix/high complexity jobs and the NXT is more for low complexity, hig
Electronics Forum | Mon Jun 30 06:22:59 EDT 2014 | abhilash4788
Some clients in our company has provided more or equal quantity of parts for the pcba build. say a resistor (0603 package) qty provided is 450-500 (QPA is 1) for building 450 pcba's. Due to this i'm looking for any possible way to reduce drop-page of
Electronics Forum | Tue Mar 16 17:34:27 EDT 2021 | dan_ems
Hello, can you help please with a question regarding Fuji NXT programming? During the placement of the components on the fuji interface the image of the components during alignement can be seen on the Fuji operator interface. My question is can be al
Electronics Forum | Sun Oct 16 22:53:08 EDT 2016 | a1
Hi, I have a FUJI CP4-3 machine that is experiencing issues with missing components. The machine keeps on running even after many parts are missing and it releases the board thinking it's complete. For an example, say there is 200 components to pla
