Electronics Forum | Fri Oct 03 07:49:19 EDT 2008 | grantp
Hi, I just saw the new NXT machines at globaltronics in Singapore, and mostly they are faster. However what was interesting is Fuji shows a prototype of the new XPF machine, but it was called XPF-W which handles really large PCB's and uses the sam
Electronics Forum | Thu Oct 04 00:01:59 EDT 2018 | gaintstar
Flason SMT FUJI Pick and Place Machine: http://www.flason-smt.com/product/FUJI-Chip-Mounter-SMT-spare-parts-A10395-Fiber-Amplifier.html http://www.flason-smt.com/product/FUJI-Chip-Mounter-SMT-spare-parts-Amplifier-A1038t.html http://www.flason-smt.co
Electronics Forum | Thu Feb 02 18:17:47 EST 2006 | grantp
Hi, I think you can run the wide modules if you need to run large boards. However we went for a bunch of XP machines instead of NXT, because we can use IP and CP feeders, plus we get 100 feeder slots per XP-143, where each module of NXT has less. Bu
Electronics Forum | Mon May 12 07:29:17 EDT 2008 | chrispink1
Trying to talk to these intellegent feeders, especially the FuJI NXT, anyone have any info that may be useful ?
Electronics Forum | Sat May 28 16:14:04 EDT 2011 | kiss
FOV - Feeder Offline Verification. Kit is generally used with FujiTrax for verification, however it can be used to power up the entire feeder pallet while it sits on the pallet change unit of the M3 or M6.
Electronics Forum | Fri Feb 06 10:23:15 EST 2004 | pjc
Hi Stefan, We had a good operator. He adjusted the heat and pressure to get it right on the used tape. We re-used tape from Samsumg & Toshiba TSOP44, QFP64 ASIC as well as a connector on 56mm tape when they came in tray. We also did on many SOICs of
Electronics Forum | Thu Apr 21 06:05:48 EDT 2022 | sophyluo1985
Hi，Dear All，Recently we have many customers asking us, FUJI NXTIII pick and place machine can use W08c feeder or W08f feeder, which one is better? We know the W08c will cost less than the W08f feeder. But there will still be some people who will be c
Electronics Forum | Fri Jun 24 00:50:10 EDT 2005 | FAC
The AIM was actually designed to use some of the same hardware that the NXT machines use (placement heads, feeders). Main use for this machine is HighMix/LowVolume, NPI, prototyping. It will be at the ATE show in Sept. BTW - It is not going to replac
Electronics Forum | Thu May 15 12:02:42 EDT 2008 | scotceltic
Japanese (He He) Good one Mark. I have NXT's and I know that the communication for the feeder size and pitch among many other data comes through across a Fuji Open Interface software. (Fuji proprietary software) We use this to talk to our part numb
Electronics Forum | Fri May 29 03:27:36 EDT 2009 | grantp
Hi, I have only handled MYDATA and Fuji personally. MYDATA was not realiable, Fuji's are perfect. As for feeders the XP series, we have 5 of them, and they all use the same feeders as the older machines such as CP and IP series. The XP can even use
