Electronics Forum | Tue Mar 16 17:34:27 EDT 2021 | dan_ems
Hello, can you help please with a question regarding Fuji NXT programming? During the placement of the components on the fuji interface the image of the components during alignement can be seen on the Fuji operator interface. My question is can be al
Electronics Forum | Thu Jun 10 19:00:09 EDT 2021 | kojotssss
Hi, What version of NXT module application do you have?
Electronics Forum | Sun Oct 02 10:40:10 EDT 2022 | omar08
Hi, I have this problem in NXT3 fuji machine . 80001919 vacuum break completion error. 88D40000 Placement (part rejection ) error
Electronics Forum | Thu Feb 15 15:23:12 EST 2007 | bvdb
The IP-1 vision error is" "Processing Error" er 401F 4003 which the FIP-I Operating Manual says the cause is "The actual number of leads on the part exceeds the number of leads in the Part Data". I have checked and re-checked the part data, lead
Electronics Forum | Thu Feb 15 17:00:37 EST 2007 | bvdb
Hi Jerry, Thanks for coming to my aid again. I have tried your settings of 10% for Lead check and pitch limit but still rejects the part. The vision image looks clean on the display. On one of the last trials I noticed that the part was picked up
Electronics Forum | Thu Jan 11 19:18:24 EST 2024 | madisreivik
Hello ! FUJI IP3 left head sometimes places component with rotation error. Vision processing SHOWS that component needs rotation Mechanical side is checked, looks fine. Also, changed servo, no effect. It happens randomly, maybe 1 part from 30. It
Electronics Forum | Sun Oct 09 13:16:13 EDT 2022 | acouto
yes, they have already been tested with different heads and the error persists.
Electronics Forum | Thu Feb 02 20:48:07 EST 2006 | ____
I would like to start a new post regarding fuji > NXT machine. What do you think about the machine > as far as the servicing of the machine goes. I am > so used to the older machines such as : CP,IP, > and QP. Those machines at least give you som
Electronics Forum | Fri Oct 07 04:26:13 EDT 2022 | acouto
We are having an issue after performing a head cleaning. Error 0x0000D005 - "An error that can be cleared (alarm) has occurred at the axis" We are trying to solve this problem but every time we insert a head into the cleaning machine, it gives us the
Electronics Forum | Fri Sep 20 05:17:10 EDT 2002 | byates
What are the error codes?? you dont even know if it is the vision type until you have checked this out. It could be camera lighting. Do you know how to use vision trace on your machine? What is your x&y tolerance? What about vision 254 or 255 have yo
Industrial Sensor Vision International specializes in advanced camera technology of high resolution fast speed cameras for automation, AOI, 2-D/3-D, SPI inspection and wafer inspection.
3 Morse Road 2A
Oxford, CT USA
Phone: +1 203 592 8723