Electronics Forum | Fri Jun 14 02:53:15 EDT 2002 | myfloh
It is a FUJI Line with the machines: GP641 GL641 CP6 IP3 the oven is the smt Quatro peak. Moreover we have an AOI.
Electronics Forum | Fri Jun 14 13:19:15 EDT 2002 | mjabure
The first question is, is this a high mix, low volume environment or vice versa? If it's the former then Kens solution is something you might want to look into. Depending on your feeder set up you might check to see if your operators have been traine
Electronics Forum | Tue Apr 26 07:37:59 EDT 2011 | leemeyer
Have you performed the camera to nozzle calibration ? I can send you instructions for this if you need them.
Electronics Forum | Tue Apr 26 09:46:27 EDT 2011 | veeckm
Thanks for the reply. I have not performed the camera to nozzle calibration. Is this the same as the calibration of the vu3 camera in the manual? If you would please give me your instructions, any help is appreciated.
Electronics Forum | Thu Jan 18 14:03:09 EST 2007 | pima
Hello everybody!! I would like to know what kind of tool do you use to analize pick-up error rate at CP and IP fuji machines? Is it special kind of software or you use some customized solutions? Im thinking about writing some kind of database based
Electronics Forum | Mon Jul 18 21:36:18 EDT 2022 | ttheis
We have two GSM machines (4-spindle, single beam) and had a camera fail on one machine. We decided to clean and calibrate the cameras on both machines. One machine we had no problems and all is working properly. The other machine will not pick up the
Electronics Forum | Wed Dec 23 22:00:50 EST 1998 | Phillip Hunter
| Many machines now have adaptive pick that helps tune in the pickup as the 0402 part moves around in the pocket. Fuji may have a feature like this, but I think they adapt the pickup in only one axis (by adjusting the feeder rack). Unfortunately th
Electronics Forum | Mon May 24 19:37:07 EDT 2004 | marcelll
Hi Grant, you have 2 good machines there. Thing to remember: Fuji machines need an external controller to run (Fuji cam or Flexa), you will have to buy that (extra cost). HSP have is own firmware include. HSP can do pick-up correction both in X and Y
Electronics Forum | Wed Oct 17 08:09:09 EDT 2012 | fujiphil
This problem is caused by poor pick-up. Check the pick-up from MTU to shuttle, then shuttle to placing head 1. If the pick-up is not centered, adjust proper data.
Electronics Forum | Wed Dec 23 21:27:26 EST 1998 | Jim Mitchell
Many machines now have adaptive pick that helps tune in the pickup as the 0402 part moves around in the pocket. Fuji may have a feature like this, but I think they adapt the pickup in only one axis (by adjusting the feeder rack). Unfortunately this