Electronics Forum | Tue Feb 26 05:14:48 EST 2002 | saiwong
Thru. the Astro Technology UK. They might sell the parts to you.
Electronics Forum | Mon Feb 25 21:15:28 EST 2002 | davef
What do these guys [ http://www.fujiamerica.com/contactus/parts.asp ] say?
Electronics Forum | Wed Mar 04 14:06:57 EST 2009 | chrisgriffin
Has anyone ever seen a designator "TH1"?? I am replaceing a component on a Fuji CP-6 MX100 PLC. It looks like a gray cap, but the designator is TH and it has a resistor symbol under the part. Markings on the part are: S 22007 A J
Electronics Forum | Thu Aug 04 13:58:20 EDT 2016 | sumote
Does anyone have the technical specifications for the Fuji CP6 and the Fuji IP3? Looking for the placement speed (parts per hour), accuracy, smallest/largest component size, fine-pitch (what size it can do). Our new sales guy is putting together some
Electronics Forum | Tue Jun 01 16:12:49 EDT 2004 | gregf912
The 10k rebuild does not need to be applied every 3-4 months as previosly stated. A cp machine that is running 100% of the time on a 24/7 basis will tack up 10k hours in 12.4 months. Now we all know that this is impossible due to parts shortages, pro
Electronics Forum | Tue Jan 24 18:21:22 EST 2006 | fredc
I have some old Fuji windmills here and I checked the usefull travel. It is approxiamately 1.5mm, the nozzles are suposed to have .3mm "preload" wich will take away from the usable overtravel. The windmill I checked is a reject that from when we rebu
Electronics Forum | Thu Mar 03 11:10:20 EST 2005 | Dougs
I'm telling you i've bought the nozzles wound the wrong way and it helped, no more probs with nozzles sticking, i'd tried buying fuji nozzles, checked all my component heights, set Z0 properly, checked shaft heights, set up st1, etc etc but the new s
Electronics Forum | Mon Jan 21 08:47:36 EST 2002 | pr
The nozzle shafts are different (and windmill/ head), cutter blades and assy. are different, that's all I can think of off the top of my head. Also slightly slower than a CP64. I believe the 65 and 65000 are the same.
Electronics Forum | Thu May 03 13:37:07 EDT 2007 | cyber_wolf
We occasionally have this problem where the nozzles peck little holes in the component overlay tape causing it to break. It only happens on universal tape covers. We see it on our CP4 and CP6 machines. Has anyone else experienced this ?
Electronics Forum | Thu Jun 14 16:31:38 EDT 2007 | aj
I concur Chunks ! A simple test to carry out is the Z0 height check across the board, with particular attention to the area of the board you are having problems. You should at least see the nozzle touch the board , ideally press the board slightly.
Main Products: 1. Original new and Original Used SMT/AI Spare Parts. 2. SMT Equipments And Related Machine( SMT Calibration, SMT Feeder Carts,Conveyer etc.) 3. Maintenace and Repair Service Pre-Sales Service Provide details ab
Manufacturer's Representative / Manufacturer / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
Building A, Jiepeng Square, Fuyong
Shenzhen, 30 China
Phone: 0755-33578694
.png)
