Electronics Forum | Fri Jan 12 15:32:53 EST 2024 | madisreivik
Indeed I found some vacuum problems, one replaced small hose was not fitted correctly. Lets see if that helps :) Great thanks ! Also, Travis, do you have any information how to adjust the milk-plexiglass slitted covers on line scan cameras ?
Electronics Forum | Tue Jul 05 07:02:26 EDT 2022 | richardcargill
Possibly, yeah. Or the wrong sized nozzle ( or chipped or blocked ) We have problems occasionally with larger components and vacuum levels. If the component has a makers 'circular void' on the pick up surface then the actual pick coordinates have to
Electronics Forum | Tue Jul 05 07:16:35 EDT 2022 | madisreivik
The problem is that.. 1) it always drops at the same location and the vacuum led shows that machine indeed turns the vacuum off ! 2) the same nozzle picks up much heavier components from other feeders without problems 3) the MTU component - i turn
Electronics Forum | Wed Sep 22 16:48:40 EDT 1999 | C.K.
Question for you SMT guru's out there. What is the best way to support boards on Fuji's CP6 machine's x-y table...particularly for 2nd side SMT where the support side already has parts... I am toying around with the following methods: 1.) Custom b
Electronics Forum | Wed Sep 22 16:51:05 EDT 1999 | C.K.
| Question for you SMT guru's out there. | | What is the best way to support boards on Fuji's CP6 machine's x-y table...particularly for 2nd side SMT where the support side already has parts... I am toying around with the following methods: | | 1.
Electronics Forum | Thu Sep 23 10:20:58 EDT 1999 | Earl Moon
| Question for you SMT guru's out there. | | What is the best way to support boards on Fuji's CP6 machine's x-y table...particularly for 2nd side SMT where the support side already has parts... I am toying around with the following methods: | | 1.
Electronics Forum | Fri Jul 01 17:52:45 EDT 2022 | madisreivik
Hello ! I got very strange problem with Fuji IP3 (year 2000 something) MTU picks up the part and puts it on carrier conveyor Conveyor moves the part into main machine. All the positions are correct, centers etc.. But now, the main machine pick th
Electronics Forum | Thu Apr 28 12:00:15 EDT 2005 | pr
You might try..... http://www.wpsales.com/ or SMT research They sell aftermarket nozzles etc. and if you show them a market for these Vac. pads I bet they would start carrying them (they may have them already). I'm sure there are others out there b
Electronics Forum | Thu Jan 11 19:52:55 EST 2024 | travishemen
Check the top of the placing head. There are 3 screws around a piece that pops up when you push up on the nozzle. I had one once that was vibrating and causing the part to place slightly off angle. It is exposed to the vacuum used to pick the part
Electronics Forum | Mon Aug 22 08:09:51 EDT 2005 | cyber_wolf
The only time I have seen any Fuji IP need calibration is if you have had a serious crash, or if an axis or camera has been removed. Make sure you don't have something else going on. For instance check these things: 1.Check nozzle vacuum 2.Make sur
