Electronics Forum | Thu Apr 11 11:32:16 EDT 2013 | markhoch
It might help to investigate the error code provided for the rejected parts. It could help point your troubleshooting methods in the right direction. (Example, if it's failing for vision errors, you may need to make adjustments to your vision file di
Electronics Forum | Thu Oct 16 12:15:40 EDT 2008 | muarty
Is the nozzle used to pick the offending used to pick other parts in this program? Have had experience where the LED's inside the nozzle backlight have broken down causing Vision Processing errors. And worth making sure that the brushes on the head a
Electronics Forum | Wed Oct 15 15:08:05 EDT 2008 | mbrunton
I have a Fuji IP1 using the MCS control system. Everything works fine, but it seems to have tons of problems placing PLCC4 parts (Osram Power TopLED). Some reels I load up it will give a vision processing error for about 1 out of 10 parts. Other r
Electronics Forum | Tue Jul 13 00:40:44 EDT 2004 | Darren
Yes of course we are doing placement of BGA's with an IPII. However there is no front lighting so you can not inspect the balls. If the silhouette is square enough there is no problem with alignment. Just use the largest nozzle that will fit on the p
Electronics Forum | Fri Jun 24 01:01:41 EDT 2005 | FAC
If you are only concerned with the outline and it has 4 corners, VT-10 or 254 will work with backlighting. If the FIP3 machine has a 4400 card installed, frontlighting with high I/O counts could take a while during vision processing. If your machine
Electronics Forum | Thu Aug 05 20:33:48 EDT 2004 | Dhanish
The machine type is Fuji CP6.We have major issues with Network Resistor placement.The equipment guys often feedback there is a problem with nozzle and feeders.What will happened to the part if the Thickness data in the Part Data does not match the Pa
Electronics Forum | Wed Oct 15 17:20:57 EDT 2008 | mbrunton
2, I have to scroll down to the bottom to see the image... and the outline of the legs isn't very clear. The legs are sort of blurred together. I had tried lowering the CCD offset in the part definition to -50, but it still looked bad. Could this
Electronics Forum | Thu Aug 05 20:11:31 EDT 2004 | Darren
Dhanish, There are a number of things to know before we can answer a large question such as yours. 1) what machine is being used. 2) how does the machine account for height at placement. 3) is the part rotated a large amount after placement. 4) is th
Electronics Forum | Thu Jan 13 09:55:44 EST 2005 | fasst1
Rob, I actually work for Philips / Assembleon. We have had machines out in the field for 18+ years that are still in production. The customer I mentioned has had the gear for 4 years. They also do multiple changeovers every day, and each one take
Electronics Forum | Wed May 09 12:07:52 EDT 2001 | caldon
My personal favorite is the Siemens F series and the UIC GSM platform. Both Siemens and UIC have awesome resources for csp, flipchip and baredie processing - Siemens= Dan Baldwin from GaTech; UIC = George Westby from UIC labs. My second choice would
Industrial Sensor Vision International specializes in advanced camera technology of high resolution fast speed cameras for automation, AOI, 2-D/3-D, SPI inspection and wafer inspection.
3 Morse Road 2A
Oxford, CT USA
Phone: +1 203 592 8723
