Electronics Forum | Tue Jun 06 23:52:52 EDT 2006 | saiwong
According to your low/mid volume production. I suggest you to use the Fuji XP 143, XP 243 or QP 341E with MTU. The cost of new totally less than 250k.
Electronics Forum | Thu Aug 07 09:37:38 EDT 2008 | cyber_wolf
How many out there are using Fuji XP243 machines ? What are your experiences? Good/bad ?
Electronics Forum | Fri Aug 08 08:01:29 EDT 2008 | mmjm_1099
I use a XP242 and like the machine but it does have limitations on vision system. I am unsure if those same limitations apply for the XP243. If you need a good reference of a tech on these machines call IBE, SMT Equipment and ask for Jim Bozak. When
Electronics Forum | Thu Oct 04 00:01:59 EDT 2018 | gaintstar
Flason SMT FUJI Pick and Place Machine: http://www.flason-smt.com/product/FUJI-Chip-Mounter-SMT-spare-parts-A10395-Fiber-Amplifier.html http://www.flason-smt.com/product/FUJI-Chip-Mounter-SMT-spare-parts-Amplifier-A1038t.html http://www.flason-smt.co
Electronics Forum | Fri Jun 02 07:16:55 EDT 2006 | philips
hi Efren, 25k/month means this will come 1000 units per day(25days) so 500 for 1 shift, so by using following method u can easily produce ur target. MPM AP25 - XP-142 - XP142 - XP243 - VITRONICS reflow, this is the best method, by using optimastic pr
Electronics Forum | Tue Jul 19 02:24:48 EDT 2005 | Vinit Verma
Assembleon A Series does it. Sony F-130 and Fuji XP143 both claim it possible on these machines. But I too wonder if there is a real need going down to 01005 from 0201 at least!
Electronics Forum | Fri Aug 08 09:11:44 EDT 2008 | nats
We have had one in our facility for 2 and 1/2 years. Running it 24/7 Monday - Friday and some weekends as well. Have not had one bit of trouble. Rock solid Fuji.
Electronics Forum | Thu Feb 02 18:17:47 EST 2006 | grantp
Hi, I think you can run the wide modules if you need to run large boards. However we went for a bunch of XP machines instead of NXT, because we can use IP and CP feeders, plus we get 100 feeder slots per XP-143, where each module of NXT has less. Bu
Electronics Forum | Fri Sep 22 08:37:54 EDT 2006 | Rob
Hi, you want something that will not break down, and something not American then. I would look at the Fuji XP-143E (if you are not going bigger than 20mm x 20mm) or the Juki then. Also I would look at what they are predominately using in Turkey, as
Electronics Forum | Tue Oct 25 15:29:33 EDT 2022 | smtusa
Looking at Fuji XP143e rated at 20k cph but what is its real world speed for 0402 chip shooting? Does anyone have experience with this machine? How reliable is it? Any major problems/drawbacks? There isn't much written in past forum posts about i
winsouce.jpg)
