Electronics Forum | Thu Jul 21 01:29:07 EDT 2005 | matjen
We are using Fuji-Flexa software and we are not sure where to go in the software to check the proper data. If anyone has Fuji-Flexa software and could direct us in the right direction please let me know. Thanks.
Electronics Forum | Fri Sep 21 12:48:29 EDT 2018 | andrewpayonk
Does anyone have a copy of the Fuji Flexa software? Any help will be appreciated. You can directly email me at kidrocker70@hotmail.com Thanks again, Andrew
Electronics Forum | Fri Mar 26 15:44:25 EST 2004 | heatherc
If you are interested in references for the use of Aegis software with the Flexa interface, feel free to contact Aegis directly and they can supply that to you. Aegis HQ - 215-773-3571
Electronics Forum | Mon May 01 05:47:29 EDT 2006 | aj
Hi, Did you sell the PC that you had Flexa Installed on as part of the package? If so , you should have no problems. Fuji should just send the updates directly to the new customer. If there is a fee for this so be it , its not your problem.( in hind
Electronics Forum | Tue Mar 20 19:18:53 EDT 2007 | diesel_1t
Hi to all, thank you very much for your feedback. The part is rotated before inspection; and also tend to be shifted to the same direction of pre-rotation so i think is not correcting misalignment or maybe some settings on shape data are not correc
Electronics Forum | Mon May 01 15:55:35 EDT 2006 | pfifla1
Well Fuji sends software updates directly to PC and at the end of every year it is required to install the new updates to keep running so pretty much if you have the PC you have the software for life. unlike software like circuitCam and others that u
Electronics Forum | Sun Jan 29 02:33:36 EST 2006 | daxman
Hello all, I work with a company which runs a fairly small SMT department. For now, we have a "main" line consisting of a Fuji CP6-45, and a Fuji IP3, and a proto line which uses a Fuji CP4. We also use Fuji Flexa programming software. The issues
Electronics Forum | Thu Jun 05 20:20:30 EDT 2008 | mika
Of course this should never occur, but this, forgive me shitty worlds of a complex Flexa system, which makes me cry once in a while. Does anybody here at this forum know what it takes to install this shit? First You have to set up a dedicated Flexa
Electronics Forum | Wed Jul 12 16:39:59 EDT 2006 | SWAG
Can anyone help point me in the right direction on fixing problems related to the following Universal GSM2 errors?: 1) Axis head 1 Z position following error during Move Absolute command. 2) Axis head 1 Z error not recognized during Move Absolute
Electronics Forum | Fri Jul 07 17:17:43 EDT 2023 | ttheis
We swapped the Y1 and Y2 pc800 controllers with no change. We swapped out the UIMC III-I cards from another machine with no change. VRM amps all look OK, no errors. The machine moves the head both in the x and y directions during the zeroing attemp
