Electronics Forum | Fri Jun 04 13:23:54 EDT 2010 | mmjm_1099
For the machines that are similar I would start by making sure the model name and machine name are different. The machine type can be the same but you need to add a different sufix at the end or something. See if this helps and should be able to do s
Electronics Forum | Wed May 26 05:58:50 EDT 2010 | chrislyttle
Hi, first time posting on here. We've recently acquired additional Fuji machines to add to our line and have moved premises to a new factory. I've been trying to set up a new factory line in Line Editor to use two of our existing machines (Fuji GSP
Electronics Forum | Wed Dec 30 11:24:51 EST 2015 | ttheis
Hi Tushar, That is the conclusion that I was coming to before Gary's suggestion. I think a sensor will probably be the best solution but it is good to have options and back-up plans. Thanks everyone
Electronics Forum | Wed Jul 18 00:35:13 EDT 2012 | fujiphil
If you have the backup files for your program and proper. Try to flush-out the machine memory. Then try again to report CP4 to flexa. If the reporting went good, the communication must be ok. Resend the proper and program.
Electronics Forum | Sat Feb 16 22:19:11 EST 2013 | mdang
Hi, I bought a fuji Flexa v4.6.0.7 and hook it hook it up with CP65 machine. The flexa system already have CP65 configure so I can see the production program on the machine and delete them but I can not transmit a new program to the machine. It error
Electronics Forum | Tue Nov 20 06:19:42 EST 2007 | kircchoffs
just add FIP2 in fujiflexa when you are adding machine at factory lines. if you are connected just receive the proper data from the machine and re-transmit the proper data.
Electronics Forum | Fri Jun 22 13:49:27 EDT 2012 | johndoe0222
We recently made a backup of our FujiFlexa and Fuji give us a new License for the new installation. Then loaded the program into the machine and now its placing some of the components off. We retransmitted the Status and Proper then reloaded the
Electronics Forum | Wed Jun 04 10:49:23 EDT 2008 | arbarr
The the HDD onwindows 2000 pc running Fuji Flexa for 5 m/c's on our smt assembly line died 2 weeks ago. We've since reinstalled a new HDD. To cut along story short Fuji via their agent here (Productivity Partners Formerly Astro) after 14 days do
Electronics Forum | Wed Feb 02 11:10:07 EST 2005 | jdengler
Hi AJ, I've never used the Flexa due to the price. We replaced our MCS with eSMT Software (web site http://www.esmt-software.com/). You might want to look at this if you don't need all of the Flexa features. We have older Fuji equipment (GSP's
Electronics Forum | Thu Jun 05 17:54:42 EDT 2008 | iantech
The the HDD onwindows 2000 pc running Fuji Flexa > for 5 m/c's on our smt assembly line died 2 weeks > ago. We've since reinstalled a new HDD. To cut > along story short Fuji via their agent here > (Productivity Partners Formerly Astro) after
