Electronics Forum | Tue Sep 04 13:23:10 EDT 2012 | jvoytovich
I've got an older (90s?) Contact 3Z system with a bad Falcon vision card. The CPU refuses to even enter the BIOS (or display anything on the monitor) with the card plugged in, but boots normally with it out. I'm looking for any advice on a replaceme
Electronics Forum | Mon Feb 19 01:59:15 EST 2001 | dadi
I'm looking for a Transtarent & Non-Transparent PCI-to-PCI bridge that compliant with the Compact PCI Spec. This bridge must have the ability to be configured as Transparent or Non-Transparent. I aware to one chip that have those abilities. This chip
Electronics Forum | Fri Jul 20 02:02:54 EDT 2012 | fujiphil
Have you ever try to replace the CP4 CPU card? Please try replacing CPU. Some cases, machine will boot normal. But no communication to the other machine.
Electronics Forum | Fri Feb 09 14:49:04 EST 2024 | erikfriesen
Its looking like this was a CPU speed issue. The BIOS defaults to X3, and it needs X7.5 for the PCA-6180E CPU card.
Electronics Forum | Tue Jul 15 17:30:38 EDT 2003 | ServGuy
00c is a hardware interuption Addr F92228A0 is out of the card rack, meaning probably the CPU or memory PCB is out of control. Swap the 1st and or last card in the card rack with another machine or from spares.
Electronics Forum | Wed Aug 23 14:44:07 EDT 2006 | johnw
They are various way to debug this problem, try booting into mecha check, The cpu wouldnt cause a vp error all that is related to the VP are 3 cards the gognex the vp card and the memry backup card. If this fails print out the trace machine code and
Electronics Forum | Tue Jul 15 17:52:30 EDT 2003 | samaniegocesar
I found the problem. The CPU is damaged I change the cards and it works.. Thanks and best Regards...
Electronics Forum | Fri Aug 30 04:45:41 EDT 2013 | anilw2006
Need to change CPU card HIMV-134. I had facing same problem. Regards, Anil Wagh.
Electronics Forum | Tue May 28 12:56:22 EDT 2019 | dekhead
It is a communications failure between the CPU and the Cognex card. Does comms initiate between the 2 cards (flashing green on both)? or does it immediately come up red LED on Cognex? Have you reseated the CPU board as well as the Cognex? Is this a s
Electronics Forum | Sat Aug 26 03:18:15 EDT 2017 | ausplex
Mid-production our KE-730 halted and gave us a “SUB CPU1:BUS ERROR” message on the video monitor. Then we got on the same monitor a detailed error message with address and byte information (unfortunately I didn’t copy the details). Now when we boot
.gif)
.gif)
