Electronics Forum | Fri Dec 09 00:19:51 EST 2016 | aqueous
Hi Dean, We are a manufacturer of cleaning equipment. I'm not sure if your machine is one of ours or another brand. Regardless, I am happy to provide assistance. In order to maximize the level of "helpfulness", it would be helpful for me to know mor
Electronics Forum | Thu Jul 12 15:56:25 EDT 2012 | dboudrea
Does anyone have the cleanliness tester Zero-Ion G3 from Aqueous. What are the pros and cons? Any feedback on this machine would be really appreciated. Thanks
Electronics Forum | Mon Apr 25 22:56:44 EDT 2005 | davef
rush316 First, no one stated that PBB and/or PCBE are in FR4. FR4 contain tetra-bromo-bisphenol A [TBBA]. Second, there are classes [and grades] of dielectric materials used in fabricating printed circuit boards. Grades, NEMA LI-1. From these gr
Electronics Forum | Thu Jan 29 17:04:43 EST 2009 | jeffjarmato
I run two different waves here one with SAC305 with aqueous flux the other with SN100C and No clean flux. Does anyone see any issues with running product through either machine of course after changing the Flux type? I also only use SAC305 alloy for
Electronics Forum | Thu Jun 06 07:53:51 EDT 2002 | Jim M.
Has anyone had much luck Picking and Placing die with a Panasonic MPA-G3?What special setups or considerations are required? Currently we pick and place one die with our Universal GSM using only one nozzle. The nozzle must be painted white in order
Electronics Forum | Tue Feb 29 10:14:02 EST 2000 | Robert Hartmann
My company is just getting into the flip chip packaging arena. We are putting in a prototype/small volume wire bond PBGA line. We have some questions with regard to choosing solder balls and cleaning of flux. 1) Is there a formula for the shrink
Electronics Forum | Tue Feb 29 10:14:02 EST 2000 | Robert Hartmann
My company is just getting into the flip chip packaging arena. We are putting in a prototype/small volume wire bond PBGA line. We have some questions with regard to choosing solder balls and cleaning of flux. 1) Is there a formula for the shrink
Electronics Forum | Tue Nov 09 11:42:37 EST 1999 | Dave F
Jeff: Try this: ROSA. John�s spot on. I�ll add that it is a fluxless method that reduces the oxides in an aqueous solution. Another source of information is: Trench, M., Hillman, D., Lucey, G., "Environmentally Friendly Closed Loop Soldering,"
Electronics Forum | Wed May 22 16:36:13 EDT 2002 | slthomas
What methods do you guys use for maintaining lot and/or board traceability? When I worked in med. products, we used travelers that we recorded everything on, then serialized them at the end of the build. Not as effective as up front serialization,
Electronics Forum | Thu May 30 10:31:03 EDT 2002 | robbied
Hi Yannick. This is an issue that we are just recently getting into but here is some ifo that I have gathered so far. I have seen/ used 2 different rework machines. The one we have bought is a 'PACE TF2000' which was at the lower cost end of the mar
.gif)
winsouce.jpg)
