Electronics Forum | Thu Aug 16 14:02:08 EDT 2012 | benreben
Hi all, i search the proper method for adjusting gain/offset on fuji FCP4 can you help me? thx
Electronics Forum | Wed Apr 24 11:11:31 EDT 2002 | cnoonan
Sounds like your problem is your camera setting for Head 1 (Gain & Offset), are you rejecting any other parts on that head? Go to (Set) (Propers) (Cameras) (Gain & Offset) you can then zoom in and out to check light contrast. Check the numeric col
Electronics Forum | Sat Aug 18 10:06:05 EDT 2012 | cyber_wolf
There is no defined method that I am aware of. If your bulbs are old replace them. Other than that adjust the gain and offset until there is clear definition on the edges of the components. Keep an eye on the dump box.If the dump box stays relatively
Electronics Forum | Tue Sep 27 23:02:55 EDT 2005 | selva Govind
Hi Mark, This problem can be overcome by adjusting the camera brightness - Gain & Offset. I think the offset value is very high. Try reducing it.
Electronics Forum | Thu Apr 25 21:58:54 EDT 2002 | Gang shen
thank all of your kind help.today I set the camera gain and offset same as the camera2,the gain is 180,and the offset is 105. First the vision process is failed to pass ,later I found the size of the BGA ball in the screen is so smaller than the rea
Electronics Forum | Mon Oct 17 10:14:32 EDT 2011 | swag
Do you have cal. fixture(s)? If not, one 1/2 baked way to get yourself closer quickly is to go into your programs and write down your x/y offsets that you've gained during vision offsets while in production. Compare them - hopefully they are very s
Electronics Forum | Thu Apr 07 09:24:47 EDT 2011 | rway
What version of sw are you running? There are some new features in 2.7.7 and earlier that may be of benefit to you. With chip caps you are testing for presense/absense. The gain/offset feature can be used to give you better contrast between the pa
Electronics Forum | Mon Oct 03 12:17:18 EDT 2005 | jdengler
Another problem I have seen on CP's is mixing suppliers on the Anti-Marking Illumination Disks. Some after market suppliers disks do not reflect the light the same as Fuji's disks. It is nearly impossible to get the lighting level good enough for r
Electronics Forum | Wed Apr 26 17:33:24 EDT 2000 | John
I agree with what has been said, P pattern takes some playing with, but length and width need to be what the machine is seeing not actual (use trace). The biggest improvement I got was slowing the frontlight scan speed to 50% of backlight setting in
Electronics Forum | Wed Apr 28 17:41:44 EDT 2004 | longpham246
Hello! We placed quite a few of 0402 with our CP3 using 0.7mm nozzle with the same feeder as you had. Pick up can be adjust and calibrated, but that is not the problem, I agreed with you on that part. The trick is you have adjust and play around wi
winsouce.jpg)
