Electronics Forum | Mon Mar 26 18:25:09 EDT 2018 | tey422
As far as I know, the gang picking or not, it has to do with the pick positions. By what I mean is the X positions and Y positions have to as close to parallel for all those feeders in order for "gang pick" to work. If one of the feeder XY position
Electronics Forum | Wed Jan 24 09:13:59 EST 2018 | cyber_wolf
Umm ask Juki ?
Electronics Forum | Thu Jan 18 09:31:47 EST 2018 | Robl
Hi All, Has anyone had any luck with gang picking the same part on Juki 2060 or FX1R's? Example: 100nf 0402, we can pick this part simultaneously from 8 feeders at once on our Yamaha's (or 12 on the old Sapphires), but on the Juki's we don't seem t
Electronics Forum | Tue Mar 27 02:37:35 EDT 2018 | rob
Hi Thomas, Yes, we are pretty good at feeder maintenance, we gang pick on our Yamaha/Assembleon kit with no issues. On one of our older machines (YV112-3/Sapphire) we pick 12 LEDs at once per side of the machine. On a couple of jobs we exceed the ma
Electronics Forum | Fri Nov 16 09:28:08 EST 2018 | robl
If you are gang picking from 6 reels in a row for the same part, so the head goes down twice for 12 components, which is easily done on the boards you have previously described, you should see 18K+ per hour with decent panelisation. On an LED panel
Electronics Forum | Sat Nov 14 09:00:59 EST 1998 | Earl Moon
| Any info on a BGA rework machine in the 10-20K range. | | Thanks | Mike C | In the $60K range I really like the Pace model? (y'all join in). Whether there is a cheaper, non-programmable type, the gang can answer. Earl Moon
Electronics Forum | Tue Jul 30 20:34:59 EDT 2002 | scottxiao
Hello, Gang, the following link have some discussion about Valor: http://dfx.51.net
Electronics Forum | Thu Oct 24 14:51:50 EDT 2002 | dragonslayr
Hey gang- was just wondering - how do I get them extra zero's added onto my paycheck? DaveF - can you reference the appropriate ASCII code for me? (I'll put a little something extra in your Halloween goodie bag if it works!!)
Electronics Forum | Mon Jun 13 02:54:18 EDT 2005 | Adnahn
Is your machine programs gang picking? Work out a machine set-up for commonly used components to have a fix location on the machine ( preferably on the side the operator spends the least time ).Most of your change overs take place on the front of the
Electronics Forum | Tue Apr 01 19:23:12 EDT 2008 | guhansub1
Just curious...What is the gap between the pads? If it's less than 3 mm, it's recommended to do gang relief. Otherwise the soldermask will peel off during rework.
