Electronics Forum | Thu Sep 03 09:00:52 EDT 1998 | James Horn
Can any one tell me if there is a large difference between green soldermask and blue soldermask, in reference to sending the board through the IR reflow oven. - two PCB's (smc parts) are manufactured, the first has green soldermask, the second blue s
Electronics Forum | Wed May 13 07:24:12 EDT 1998 | Sherry
Does the temp. profiles used to reflow double sided pcb's through a IR oven on FR4 board material have to be re-established if it is changed to polyimide? Boards will be baked out prior to assembly. any response would be most appreciated.
Electronics Forum | Thu May 14 04:11:33 EDT 1998 | JACK CHEN
| Does the temp. profiles used to reflow double sided pcb's through a IR oven | on FR4 board material have to be re-established if it is changed to | polyimide? Boards will be baked out prior to assembly. | any response would be most appreciated.
Electronics Forum | Fri May 15 18:13:35 EDT 1998 | Earl Moon
| | | Does the temp. profiles used to reflow double sided pcb's through a IR oven | | on FR4 board material have to be re-established if it is changed to | | polyimide? Boards will be baked out prior to assembly. | | any response would be most appr
Electronics Forum | Fri Dec 09 08:24:48 EST 2005 | zanolli
Dear Technetters We have a unique soldering operation that needs automation and we will be evaluating various methods including laser reflow and Spirig�s Microflame. The actual soldering operation entails joing two metal contacts by depositing a sol
Electronics Forum | Mon May 14 17:12:20 EDT 2001 | davef
Continuing along the path that Brian took ... IPC-7525 gives design guideline for stepped stencils. It goes something like: * Stepped area SB GT 25 thou from pads located on the greatest thickness of the stencil * Pads in stepped area SB GT 35 tho
Electronics Forum | Thu Sep 03 10:04:14 EDT 1998 | Earl Moon
| Can any one tell me if there is a large difference between green soldermask and blue soldermask, in reference to sending the board through the IR reflow oven. | - two PCB's (smc parts) are manufactured, the first has green soldermask, the second bl
Electronics Forum | Fri Jan 28 19:24:15 EST 2011 | jlawson
Should contact Rehm Thermal they have a whitepaper on pros and cons of Vapor Phase vs Convection.... Vapor phase traditionally targeted heavy PCB, large mass products better then lighter ones, due to ramp rate control being harder to attain vs say a
Electronics Forum | Thu Jul 10 13:34:43 EDT 2008 | rwyman
We have a Vitronics mySelective machine (model 6749, or "the Fat Bastard" as we affectionately call it). It's configurable with various combinations of "select wave" and "multi wave" pots. Ours has one of each. The "select wave" is for the most pa
Electronics Forum | Wed Dec 20 22:24:03 EST 2000 | Greenman
Dave: In terms of heat transfer, air is 78% nitrogen, and the remainder is mostly (20.9%) oxygen (roughly the same molecular weight as nitrogen), with a bit of argon (0.9%), CO2, hydrogen, monosodium glutamate etc. So you would expect virtually no d
.gif)
.gif)
