Electronics Forum | Fri Sep 19 10:35:56 EDT 2008 | mi
No, I don't have Panapro at all. Some Mydata files I've exported end in: *.cmp & *.gen Files saved on floppy from Panasonic MSH II end in: *.MNG, *.POS, *.SET Panasonic program filenames come out as: CF000000.POS CF000001.POS ... Sample quote of
Electronics Forum | Wed Aug 25 15:54:46 EDT 2010 | blnorman
I previously did a search on "peel back force" > and there were a few results, and there were a > few hits that say EIA-481 is the standard, but > nothing on what the standard force range is. A > search on "cover tape" yeilds many hits about >
Electronics Forum | Thu Feb 17 22:30:09 EST 2000 | Dave F
Alberto: There's no rules, but it works sorta like this: RESISTORS Usually marked in ohms using a standard code: First two numbers is the value Third number is the multiplier 102 = 1.0 x 10� ohm = 1000 ohm = 1 kW CAPACITOR Usually not marked. When
Electronics Forum | Thu Feb 17 22:30:09 EST 2000 | Dave F
Alberto: There's no rules, but it works sorta like this: RESISTORS Usually marked in ohms using a standard code: First two numbers is the value Third number is the multiplier 102 = 1.0 x 10� ohm = 1000 ohm = 1 kW CAPACITOR Usually not marked. When
Electronics Forum | Tue Aug 24 23:04:14 EDT 2004 | pdeuel
If this code is on a ceramic cap then it is a 0.1uf cap. We have a conversion charts that list most all codes. Useing the last 2 digets only determine the value. The capatol letters A thru Z are given specfic numerical value. Example A0 is 1.0pf, A1
Electronics Forum | Thu Dec 07 19:54:55 EST 2006 | davef
We agree with "guest" above. This a "chip bonder" type material used to improve the reliability of array type devices. "A relative comparison of the N50 values is given below: No underfill = 1.0X (baseline) Corner bond = 1.3X Non reworkable underfi
Electronics Forum | Tue Jan 24 09:21:34 EST 2017 | emeto
there is an IPC standard for machine accuracy and repeatability. Here it is how it works. You have to place certain number of parts on a specially designed PCB(that allows placing variety of parts on big part of the machine work area). After that you
Electronics Forum | Mon Jul 24 20:39:49 EDT 2017 | dawson
We got an inquiry from US that requires high > volume 8 layer 1.0mm PCB, OSP + selective ENIG > surface, 5 groups impedance control, and stacked > vias. These requirements are common, but there is > 2/2mil lines in inner layers. It's said that th
Electronics Forum | Wed Jun 24 15:46:26 EDT 2020 | kumarb
The blue handle CL feeders are 4mm advancement pocket to pocket - suitable for 0402 devices. The green handle CL feedersare 2mm advancement pocket to pocket - suitable for 0201 / 01005 devices. According to Elissa, she did not recommend the use of
| 1 |
