Electronics Forum | Mon May 14 03:21:20 EDT 2001 | Eyal Duzy
Phil, In the considerations you make for choosing an AOI tool, you should check what a vendor delivers today and what will it be able to deliver in the future. As the role of AOI in the SMT production line evolves from "detection" to "prevention"
Electronics Forum | Wed Oct 02 18:26:49 EDT 2019 | tey422
First of all, General Vision for Juki is not easy to learn/understand, it would be the last option if other centering method fails; only advance Juki package programmer would want to play with General Vision. If possible, using laser recognition woul
Electronics Forum | Fri Oct 04 02:17:30 EDT 2019 | billastle
Try using the Flexible 3 General Vision Algo. The XY Width deviation amount is calculated by using the data close to the minimum width of the component. The theta angle is calculated by the inclination of one side, in X direction of the component.
Electronics Forum | Tue Nov 13 04:47:19 EST 2018 | dhammika
hi Siplace Hs-60 defected due to below error Error- • Machine error:2271 Can bus: reception call aborted with time out seg:0 DEV: head 2 #:1 (this is not only head 2 ,error raise with all head interm
Electronics Forum | Thu Oct 03 17:11:11 EDT 2019 | billastle
Hi, Let me see if our Juki applications team has some suggestions. Our general table based up-look vision will work also, but will be slower than in flight laser align. Do you have a general email we can reply to with details and specifics on the
Electronics Forum | Thu Dec 21 10:20:57 EST 2023 | jeana
Thanks for the quick reply :) We've used some classic feeders that we repurposed ourselves by switching the original optical barriers (index wheel and motor wheel) with twice the resolution. It gives okayish results, not great, but the 0402 is alig
Electronics Forum | Thu Nov 16 18:41:17 EST 2006 | John Fisher
Unidec repairs of industrial electronics specializing in the surface mount (SMT) and through-hole circuit board equipment, robotics, vision systems and general automation. Plese see our website at http://www.unidec.com of call toll free at 888-701-00
Electronics Forum | Tue Apr 23 07:08:35 EDT 2019 | robertorocco
Good morning I have a problem with start my Samsung CP40 C machine. After the start Bios win98, and Dpram Initialise, system loading , vision data loading, one icone error visualize: Error Mcp, General error SCP.Exe. Solutions? Thanks
Electronics Forum | Tue Jul 13 13:58:50 EDT 1999 | JohnW
| We are looking to automate the paste printing portion of our SMT process. We are looking at used equipment from DEK and MPM from 1994 onward.(DEK 260 & 265 MPM AP20 & AP27) Does anyone have some feedback or concerns with any of these machines? Does
Electronics Forum | Tue Aug 01 20:50:03 EDT 2023 | calebcsmt
If it was only 1 or 2 components on a reel that were backwards, I would lean more likely the cause just being the component was wrong direction in Tape from factory. Not much you can do from a Pick & Place perspective, generally.. Most machines use
Industrial Sensor Vision International specializes in advanced camera technology of high resolution fast speed cameras for automation, AOI, 2-D/3-D, SPI inspection and wafer inspection.
3 Morse Road 2A
Oxford, CT USA
Phone: +1 203 592 8723
winsouce.jpg)
.gif)
