Electronics Forum | Mon Jul 28 17:13:28 EDT 2003 | Ryan Liao
Hello dear all: I have some problems with the CP642's vision process system . When the machine is working, sometimes the vision process system will appearance the error message. Error code :��1CA0A007�� Element code: FFFF Segment code: 0000 This s
Electronics Forum | Mon Jul 28 21:21:46 EDT 2003 | danielchan
hello Ryan, you can post me pictures & details of your 0402 part placement. i will try to help. regards danielchan apexservice@apexsmt.com
Electronics Forum | Mon Jul 28 18:31:43 EDT 2003 | mantis
Hi There, First has the machine in question had the camera upgraded to accomdate 0603/0402. It sounds like there is a bad pickup on this part.Are all nozzles ok is feeder indexing correctly has part pick up position(Station 1) been calibrated. Hope t
Electronics Forum | Wed Jul 30 11:11:11 EDT 2003 | Roger
Has anyone changed the PD on this part lately. Sounds like a program (PD) issue. Nozzle size should be .7mm. Narrow view should be selected. Tape leaf cover on feeder should be .7mm. Make sure parts aren't on the camera lens. Good luck!
Electronics Forum | Wed Jul 30 14:03:32 EDT 2003 | ryan1v
Hello Roger, Thanks for your help. My problem has been solved. I slow down the cam speed to 99%. But I still don't truly understand why. Maybe I have to check all the valve just like daniel said. Thank you. Ryan
Electronics Forum | Mon Jul 28 19:03:53 EDT 2003 | Ryan Liao
Hi mantis, Thank you for your helps. I had checked the CP7 error code index application. It also gives me the same answer. It tell me " the part pickup status is bad" and I have to "Make sure that the nozzle is not bent and that the part is being pro
Electronics Forum | Mon Jul 28 19:41:30 EDT 2003 | ryan1v
Hi mantis, If you don't mind. Can you give me your e-mail address(the mail service on smtnet can't attach file)? I can mail you the picture that I took from the monitor by digital camera. Maybe you can through the picture to understand what I mean "i
Electronics Forum | Wed Aug 06 14:52:15 EDT 2003 | cyber_wolf
Checking the vacuum at all stations is a good place to start. A vacuum guage with a piece of hose attached to a CP nozzle is a very handy tool to have. If you notice less vacuum at any one of the stations, you can start by looking @ the spool valves
Electronics Forum | Fri Mar 05 12:24:34 EST 2021 | astarotf
Hello Our problem was the camera that was bad, we replaced it and it worked again, greetings!
Electronics Forum | Thu Mar 04 22:38:54 EST 2021 | tomek_k
Hi Miałem taki problem, myślałem też że to uszkodzona karta Cognex. Zakupiłem nową i to nie pomogło. Okazało się że trzeba zainstalować właściwy sterownik karty. (translate from PL) regards Tomek
Industrial Sensor Vision International specializes in advanced camera technology of high resolution fast speed cameras for automation, AOI, 2-D/3-D, SPI inspection and wafer inspection.
3 Morse Road 2A
Oxford, CT USA
Phone: +1 203 592 8723
