Electronics Forum | Wed Oct 20 11:19:36 EDT 2004 | jax
The HSC, "Lightning Head", is offered on two platforms, Genesis and Advantis. The decision will depend on your throughput needs and price requirements. In comparison to the HSP, I would recomend the HSC. With the ability to use docking feeder carts,
Electronics Forum | Wed Oct 20 15:05:30 EDT 2004 | vickt
18"x24"), Low to high placement count, and need for Modularity tends to lead toward HSC Higher volume, High placement count, Lots of feeder capacity, established horizontal turret solution are all strengths for the 4797 HSP Of course there is overl
Electronics Forum | Tue Oct 09 12:28:08 EDT 2012 | jrcline43
Do you have or know of a procedure/manual for calibration on universal instruments HSC/Genesis/Flexjet feeders?
Electronics Forum | Wed May 03 13:27:32 EDT 2023 | dilogic
Genesis should work with pneumatic feeders, but not if Lightning heads are used. It's basically 24V transformer and some wires and fuses - you can do this "upgrade" by yourself, actually. Regarding cal. kit - it's the same as for GSM's but, again, no
Electronics Forum | Sat Feb 26 13:56:22 EST 2022 | poly
I was looking to swap a Universal GC60 from 240 to 400 V 3 phase. I can get a transformer though and just looked at prices and they are quite cheap. My 2 main options at the moment: Option a: 1 Universal Genesis (2006) some feeders + essemtec ove
Electronics Forum | Fri May 01 15:35:03 EDT 2020 | travishemen
I'm not sure if these are similar to our Genesis machines but if they have removable feeder banks they are part of the safety circuit. If they are not installed or if the sensors on them are misaligned it will show the same as an interlock violation
Electronics Forum | Thu Aug 20 13:15:58 EDT 2009 | ratsalad
Yes, you should be able to. The feeder interface for the GSMs (not Advantis or Genesis) has been the same as far back as I can remember... And we used to have a D-block machine. We use some of the same feeders from that old D-block GSM on the GSM
Electronics Forum | Tue Apr 25 22:17:39 EDT 2023 | poly
I think they can all support pneumatic but it might depends on the age, I'm not sure about series 2 Genesis. Something to watch is that they can't all support 24 V Electric feeders. Mine does but it's an option. 48v is the standard for gold feeders
Electronics Forum | Thu Oct 04 00:14:21 EDT 2018 | gaintstar
Flason SMT universal products: http://www.flason-smt.com/product/Touch-screen-Manual-stencil-printing-machine-solder-paste-printer.html http://www.flason-smt.com/product/Universal-8mm-CT0892-Feeder.html http://www.flason-smt.com/product/Universal-Gen
Electronics Forum | Mon Oct 09 14:09:06 EDT 2017 | ilavu
Make sure that you have some feature on the part to get orientation check. We tried long time ago and it did work on GSM with 4 spindle. For us, setup the vision system was the challenge for correct rotation using vib feeder.