Electronics Forum | Wed Jul 04 12:22:07 EDT 2001 | davef
Several points: * Consider that your Cpk is probably different for both placing large and small components. * Probably your routine placement rate SB the speed you use to monitor the accuracy of your process. * Some people use a calibrated glass test
Electronics Forum | Thu Oct 02 16:29:11 EDT 2008 | kiss
Contact your local Fuji dealer. Your questions are covered on first couple of pages of spec. Your reluctantness to contact Fuji direct sounds as though you are a competitor scratching for info. Pick a phone, call Fuji.
Electronics Forum | Fri Feb 15 03:38:37 EST 2008 | keithej2
The X1 glass scale reader is bad. After cleaning it didn't help, we removed the read head and took the cover off. There is a cracked component (L1) and magic smoke/dust on the parts around L1. There's also a dead short on the two tiny wires that supp
Electronics Forum | Thu Jun 18 19:17:16 EDT 1998 | Ben Salisbury
| I am currently using some pick & place equipment and would like to measure their cpk using a glass plate and glass "components" with vernier scales. I have seen these kits but am trying to track a supplier down in UK/Europe. | Any help is much appr
Electronics Forum | Wed Sep 12 21:24:18 EDT 2012 | marcelll
Hi Guys, I'm looking for the cad & part data for the glass board used on Fuji QP machines calibration. It is a Toppan glass board BVDZ-0240 and the glass parts going on it is a 284 pins BVDZ 0040. There another one in the kit. Glas board is BVDZ-0
Electronics Forum | Mon Jan 18 20:25:49 EST 1999 | Dave F
| I know there was some discussion a few months ago on this topic but I don't think a good solution was offered for checking CpK using chips using a chip shooter. I am looking for a way to measure this on our Fuji CP6-4000. Any suggestions? | | Je
Electronics Forum | Tue Dec 19 11:49:46 EST 2023 | jeana
Hi Everyone ! On our endeavor to get reliable pick and placing with our "new" Quad IVc, we got weird behaviours of the QuadAlign system. When we received the machine the glass of the laser side was cracked, so we removed it and it started working
Electronics Forum | Wed Jul 26 12:22:28 EDT 2006 | cyber_wolf
The new universal guide replaces .7 - 1.8 mm tape covers. Fuji no longer makes the slitted type tape covers. How can the tape guide be mis-centered ?
Electronics Forum | Wed Sep 09 20:07:41 EDT 1998 | Dave F
| I am attempting to locate a kit to be used on surface mount equipment to determine the placement capability (CPk). Does anyone have information on where to purchase such a kit? Ideally this kit should be usable on placement equipment from various
Electronics Forum | Tue Apr 13 18:57:57 EDT 2004 | TWegrzyn
Does anybody have any experience with PSA 2668 high shear cover tape on Fuji QP242s/QP351s feeders? Does it perform comparable to PSA 2666? We are looking to implement PSA 2668 due to some cover tape 'pop-off' issues with our Siemens HF machine, bu
winsouce.jpg)