Electronics Forum | Thu Aug 10 14:10:06 EDT 2000 | Alvaro Carrillo
Hi everybody, somebody know a refrigerator to storage solder paste with the folowing characteristics. 4 glass door with a system that keep the refrigerator in control showing the temperature in a display that be part of the refrigerator. any help to
Electronics Forum | Fri Aug 03 06:20:58 EDT 2012 | kahrpr
Absolutely! The Solder paste needs to be brought to room temperature or close before opening. It like bringing a cold glass from the refrigerator when the humidity is high,water will condensate on the glass. It also will condensate on the solder and
Electronics Forum | Thu Aug 10 14:47:27 EDT 2000 | John Thorup
Hello Alvaro If I understand you what you want is a refigerator with multiple glass doors, thermostatic control and a readout of the actual temperature inside. I'd suggest a restaurant equipment supplier. I've seen many of these with pies, cakes an
Electronics Forum | Fri Jan 12 08:50:38 EST 2007 | jdumont
We use the dosimeter badges and also check every morning with the machine at full power using a handheld meter around the door openings and glass just to be safe. JD
Electronics Forum | Tue Apr 01 07:21:16 EDT 2008 | davef
First, your idea of having a safety glass policy is good. The glasses should meet ANSI Z87.1-2003. [Although, ANSI Z87.1-1989 and ANSI Z87.1 are fine for electronic assembly.] Here's a comparison of the 1989 and 2003 standards: http://www.tasco-safet
Electronics Forum | Sat Mar 30 03:34:44 EDT 2019 | jacoblemaster
Are you still facing this issue? Well, I am so late to get to know this. I think you first check your evaporator coil if your air conditioner is still freezing up. It has been seen that a dirty airflow coil stops the proper flow of air through it. It
Electronics Forum | Fri Mar 08 04:27:03 EST 2013 | grahamcooper22
Homemade cabinet may sound like a simple solution but you need to think about making sure the RH is always less then 5% and everything must be ESD safe....ESD is more of an issue at LOW RH levels...so the glass / plastic in any door needs ESD coating
Electronics Forum | Thu Jul 22 07:52:37 EDT 2004 | Chris L.
Hi Grant, The purpose for allowing the solder paste to reach room temp before production is to reduce the amount of water absobtion from the air. (e.g. a cold glass of water "sweats" on a humid day)The purpose for mixing is to make the viscosity more
Electronics Forum | Wed Sep 22 22:47:38 EDT 1999 | Dave F
| Corvis has requirements for pc manufacture, parts procurement, and board assembly. This is to include boards of up to 10-12 layers, and down to 0603 SM components. If all of these are what you do, please contact me at: | | Corvis | Howard Levequ
Electronics Forum | Tue Jan 29 15:28:36 EST 2008 | jmelson
Well, I don't know if you want to muck around this much, but I bought a GE (Chinese made, of course) toaster oven with convection fan. Nice big glass door in front, you can use it in bake, broil, toast or convection oven mode. The only thing missin
