Electronics Forum | Sat Aug 08 09:45:11 EDT 2015 | edwaterfall01
It would be helpful to know what happened before the error occurred. Do you have another machine so that you can swap some boards? The Force CPU, (machine controller) located in the VME, is responsible for controlling all machine-related activities.
Electronics Forum | Wed Aug 12 18:06:33 EDT 2015 | bnorton
Here's the end of Logicomm capture on Force COMM2 where it starts the Lantern system not active messages. Couldn't get attach to work. Startup and earlier .ldx file loading omitted ulLoadTasks(): Opening the RFS pseudo device driver ... ulLoadTas
Electronics Forum | Thu Oct 28 00:01:55 EDT 2010 | emmanueldavid
XPS, Hope the information in the above thread may help to get You right. BTW, Local Fiducial Marks are meant for specific devices in the Circuit Cards & typically selected to overcome offset or precision placement issues faced from Global Fiducial
Electronics Forum | Mon Dec 14 12:02:59 EST 1998 | Greg
I have only used two global fiducials except for paneling. The only time I have ever used local fids is when I have a placement problem then I have activated the local fids for that specific part. Your best bet would be to ask Fuji America.
Electronics Forum | Fri Jun 29 03:49:26 EDT 2018 | seri09
Hi.i'm working with a screen printer EKRA E5 from 2001 and i have a problem with it. When i start the machine,the control option gets activated by itself and the CPU usage spikes to 100%. The machine works fine,but the problem is that i cannot turn o
Electronics Forum | Mon Jan 29 08:18:48 EST 2007 | mika
Hi Sami, A little more detailed information would be good,as it perhaps makes it easier for us to point you in the right direction of the root cause of your problem. And then you should fix that, rather than tweaking your programs around. 1. What typ
Electronics Forum | Tue Apr 07 10:01:04 EDT 1998 | Steve A
| Good Morning everyone. Per repeated suggestions I have been reading back issues of SMT and Circuits Assembly magazines. I have just read an article concerning selective wave soldering which I understand is to be used when active SMTcomponents are
Electronics Forum | Tue Jan 12 17:46:26 EST 1999 | Tom Gervascio
| | Good Morning everyone. Per repeated suggestions I have been reading back issues of SMT and Circuits Assembly magazines. I have just read an article concerning selective wave soldering which I understand is to be used when active SMTcomponents a
Electronics Forum | Mon Mar 19 09:37:01 EDT 2018 | spoiltforchoice
Another critical part of a process with a large board is support. Most commonly this is a bed of pins e.g something like red-e-set but there are other solutions. Support with a large panel will be critical for printing to get a good gasket between PC
Electronics Forum | Thu Jul 25 12:25:54 EDT 2019 | davef
In “J-STD-001 Rev G Amendment 1 Process Qualification” Debbie Carboni, Global Product Line Manager, KYZEN Corp, Nashville, TN said: What change constitutes a need for requalification? Major/ Level 1 – Flux or flux-bearing materials (e.g. flux, so
A Manufacturer of High Quality, Precision, Automated Fluid Dispensing and Conformal Coating Systems, SMT Cover Tape Peel Tester and Lead Forming machines for through-hole component preparation.
611 Hollingsworth Street
Grand Junction, CO USA
Phone: (970) 245-0408
.gif)