Electronics Forum | Mon Mar 06 13:00:37 EST 2006 | global
We have a Siplace S15 and I would like to know if it is possible to make it skip a part during the placement operation with out aborting the job? In section 5.4.4.4 of the user's manual it describes how to set a track to empty and proceed on with the
Electronics Forum | Tue Apr 11 11:40:41 EDT 2006 | global
We have a Siemens S15 and an F3, which we have only had now for about 4 months. We have an old line of HS180s and an SP120 and have found that the S15 and F3 do not have the option to skip a part if one runs out during placement. We from time to time
Electronics Forum | Thu Oct 28 00:01:55 EDT 2010 | emmanueldavid
XPS, Hope the information in the above thread may help to get You right. BTW, Local Fiducial Marks are meant for specific devices in the Circuit Cards & typically selected to overcome offset or precision placement issues faced from Global Fiducial
Electronics Forum | Wed Aug 13 15:02:40 EDT 2003 | Mike Cyr
At the risk of offering up a pitch, Universal Instruments Dimensions Software suite includes a functionality that would address this need. For details you might contact a Universal sales representative or browse our website (www.uic.com) for informat
Electronics Forum | Mon Dec 14 12:02:59 EST 1998 | Greg
I have only used two global fiducials except for paneling. The only time I have ever used local fids is when I have a placement problem then I have activated the local fids for that specific part. Your best bet would be to ask Fuji America.
Electronics Forum | Mon Jan 29 08:18:48 EST 2007 | mika
Hi Sami, A little more detailed information would be good,as it perhaps makes it easier for us to point you in the right direction of the root cause of your problem. And then you should fix that, rather than tweaking your programs around. 1. What typ
Electronics Forum | Wed Aug 12 18:06:33 EDT 2015 | bnorton
Here's the end of Logicomm capture on Force COMM2 where it starts the Lantern system not active messages. Couldn't get attach to work. Startup and earlier .ldx file loading omitted ulLoadTasks(): Opening the RFS pseudo device driver ... ulLoadTas
Electronics Forum | Wed May 22 08:26:28 EDT 2002 | cyber_wolf
Mydata uses fiducials on their feeders. I am not sure whether or not your are familiar with Mydata feeders, but its pretty basic. The feeders are actually magazines made up of multiple individual feeders. Example: There are 16 8mm feeders in (one)8mm
Electronics Forum | Mon Apr 30 09:49:57 EDT 2007 | slthomas
If I were you I'd keep my yap shut about who's responsible for which global problems, especially on a site hosted in the US. Fair enough? That said, you can likely get a quote for a MY9 with *some* feeders, although not an ideal layout, for under $1
Electronics Forum | Sat Aug 08 09:45:11 EDT 2015 | edwaterfall01
It would be helpful to know what happened before the error occurred. Do you have another machine so that you can swap some boards? The Force CPU, (machine controller) located in the VME, is responsible for controlling all machine-related activities.
A Manufacturer of High Quality, Precision, Automated Fluid Dispensing and Conformal Coating Systems, SMT Cover Tape Peel Tester and Lead Forming machines for through-hole component preparation.
611 Hollingsworth Street
Grand Junction, CO USA
Phone: (970) 245-0408
