Electronics Forum | Tue Feb 07 05:41:20 EST 2012 | ngineer
I've got an issue, i can't seem to figure out. I think I need to apply a global offset to all my placements for some reason, and I would like to know why, before I do it. nozzles work, picks seem ok, but the placements are off by about 1/2 the widt
Electronics Forum | Fri Jan 04 13:47:00 EST 2013 | cyber_wolf
If its the same as a Momentum then no you do not need to use jigs. There is a "global offset" field that allows you to add background offsets. The glass plate jig calibration procedure only needs to be used after a major crash or if you feel the need
Electronics Forum | Thu May 13 08:48:37 EDT 2004 | Sully
Use a Global Offset for the fiducials and the parts.
Electronics Forum | Fri Jan 04 15:20:04 EST 2013 | dontfeedphils
Any idea where the global offsets are entered? Under the vision setup there are print offsets, but these seem like they would be program specific, which is something we're looking to avoid since we will be running two machines networked. Thanks for
Electronics Forum | Mon Oct 24 22:15:30 EDT 2005 | KEN
1. Why would parts be missing? 2. Why would you have a global offset? 3. Why would it not be right the first time?
Electronics Forum | Wed Feb 08 16:01:56 EST 2012 | gosswald
Are you using Auto Program to generate the board program? If your camera offset and mod codes are OK I would check your board position settings in Auto Program and make sure they are correct. For me at least, board globals, position, and fidicuals
Electronics Forum | Tue Feb 07 07:31:13 EST 2012 | bobpan
Are your placements being placed in the center of the camera crosshairs? If not, you need to fix your head to camera offset. The numbers are kept in a couple of mod codes. You also need to update the configuration file in central controller if the nu
Electronics Forum | Mon Oct 24 11:00:11 EDT 2005 | rlackey
You can't really use a pasted board to troubleshoot the program as any components not on target simply slide off with machine vibration and movement as they won't be held by the solder paste. Whereas on double sided sticky tape they remain in place
Electronics Forum | Sat Jul 16 17:29:50 EDT 2016 | aemery
Yes, you need to run the 'offsets' calibration to correct the offset issue. If the machine is in good working order and all of the other alignments and cal's are completed then you are good shape to go to run this cal. If not, you could waste a few
Electronics Forum | Wed May 22 08:26:28 EDT 2002 | cyber_wolf
Mydata uses fiducials on their feeders. I am not sure whether or not your are familiar with Mydata feeders, but its pretty basic. The feeders are actually magazines made up of multiple individual feeders. Example: There are 16 8mm feeders in (one)8mm
A Manufacturer of High Quality, Precision, Automated Fluid Dispensing and Conformal Coating Systems, SMT Cover Tape Peel Tester and Lead Forming machines for through-hole component preparation.
611 Hollingsworth Street
Grand Junction, CO USA
Phone: (970) 245-0408
