Electronics Forum | Wed Aug 11 18:36:03 EDT 2004 | davef
90 Knoop. Q2: Thickness is 4 to 10 u" for Au and 300 to 400 u" for nickel A2: This looks like a ENIG spec. Although, the Ni is quite heavy, 150 uin is sufficient for most applications. [IPC-4552 ENIG specification: * Gold thickness of 0.075 - 0.125
Electronics Forum | Wed Jul 31 18:26:09 EDT 2013 | Jeff Kennedy
You might consider to contact a lab to Run a microindenter against a know good soft gold sample. The knoop value for the soft gold will be much lower than for hard gold. This would be reflected in the diameter measurement of the indented samples.Smal
Electronics Forum | Wed May 09 17:28:25 EDT 2018 | davef
You can't find a hardness spec for immersion gold [ImAu] because no one cares. The ImAu dissolves into the solder during thermal processing. Pressed, I'd guess for that ImAu hardness is about that of soft gold * Soft: 50-90 knoop * Hard: 130-200 k
Electronics Forum | Mon May 14 20:35:06 EDT 2001 | davef
You're correct. The units should be micro inches. By the by, this gold always should be a hard gold (99.96%-99.97% pure) with a Knoop hardness range of 130 to 200 (optimum 170).
Electronics Forum | Wed May 09 10:56:52 EDT 2018 | rickeydad
I would like to know the hardness figures of ENIG finish and hard gold finish. I can find the hard gold finish number and it appears to be 130-200 knoop. But what about ENIG finish?
Electronics Forum | Wed Dec 14 07:34:33 EST 2005 | davef
Mike Ozzy If I came to your house, I wouldn't punch you. I'd make you buy me beer. Vern Solberg; Tessera Technologies Inc., 3099 Orchard Dr, San Jose, CA 95134; 408 568 3734 F408 894 0768 vsolberg at tessera dot com. If that doesn't work try: Tes
| 1 |
.gif)
winsouce.jpg)
