Electronics Forum | Wed Aug 01 12:34:12 EDT 2001 | JohnW
The material has to be injected from beneath the component, it's a 240 pin QFP, ideally I wouldn't want the material gong past teh leads as I have to have the option to rework the thing if, perish the thought, it fail's and need's fixed.....
Electronics Forum | Sat Jul 16 18:40:12 EDT 2016 | aemery
As an MPM guy and would choose.....MPM, surprise! Of the legacy models the UP2000 seems to be the favor among most of my clients. Newer models like the Accuflex's and Accela/Momentims are great, but as far as the old stuff the UP2K's are the favorit
Electronics Forum | Fri Oct 28 21:46:35 EDT 2011 | rdh_41
Hi , I'm interested in Tin and hoping to open long-term business relationship with your company. We are Taiwan-based company dedicate in Tin (Sn). We are looking for opportunity to work with you. And it would be great if you have large quantity of t
Electronics Forum | Sat Aug 07 11:33:55 EDT 1999 | JohnW
| | What oven temperature should be used to reflow solder (Sn63Pb37) on a PC board (0.075" to 0.100" thickness) in 5 to 10 minutes? | | Profiling - tedious but important. As said, start with the paste manufacturers recomendation which is usually pu
Electronics Forum | Mon Jan 28 08:07:44 EST 2002 | JohnW
Sorry I keep forgetting you lot are backwards in the old metric system :0) anyhoo, yes IPC, the bastions of right well as long as your board is only 1.6mm thick (sorry 62mils)say that you need 75% min general and 50% on ground planes. I'd like to se
Electronics Forum | Sun Aug 08 20:59:55 EDT 1999 | Dreamsniper
| | | What oven temperature should be used to reflow solder (Sn63Pb37) on a PC board (0.075" to 0.100" thickness) in 5 to 10 minutes? | | | | Profiling - tedious but important. As said, start with the paste manufacturers recomendation which is usua
| 1 |
