Electronics Forum | Fri Feb 08 10:52:24 EST 2019 | roblackey
BLT 31-41 "No Clean Selective Flux For Aerospace" On a Versaflow 3/45 Atomises well, good hole penetration, good wetting, cleans off well in the solvent cleaner. Use for SN100C, SA0307, and 60/40.
Electronics Forum | Wed Oct 09 13:05:34 EDT 2019 | dwl
In my experience 100% visual inspection of a first article is good but visual inspection of production boards is not really useful, if you have AOI and ICT. If your process is good and defects are uncommon, human inspectors go on autopilot and miss m
Electronics Forum | Sun Dec 22 22:20:26 EST 2019 | sssamw
Sometime yes, if your design is not good enough, then supplier provide a good solution or suggestion, then you can try. Supplier is not only a supplier, sometime they're professional and expert on their area. But change should follow your change mana
Electronics Forum | Thu Jan 30 06:15:11 EST 2020 | dreambuilder
What is a good electrical equipment supplier. Im aware of two suppliers: https://www.automationdirect.com and https://www.famaga.ch Are there more good supplier worth mentioning?
Electronics Forum | Fri Sep 25 05:27:41 EDT 2020 | SMTA-64386317
Hi All, There is a problem which tin platting pad not able to get good wetting after reflow process while OSP pad able to achieve good platting. Where should I look to improve wettability at tin platting finishing. There is no component mounting on i
Electronics Forum | Thu Dec 24 14:52:24 EST 2020 | bobpan
Good job, For the comm errors i would try: 1. Reseat all the cables that plug into the white multiplexer that is attached to the back of the computer. 2. Reseat the EPCU card down inside the machine. good luck, Merry Xmas, Bob
Electronics Forum | Thu Jan 07 16:41:28 EST 2021 | capse
Phil, I'm a Fancort Rep. They have a new thermoformed tray offering that may offer a solution for you. Good hunting, Doug
Electronics Forum | Wed Sep 29 11:18:11 EDT 2021 | dontfeedphils
I've always had good experiences with BTU, without fail. I've also had fairly good experiences with Heller, although they do like to slowly die on you one part at a time (blowers, SSRs, etc).
Electronics Forum | Thu Oct 14 11:36:18 EDT 2021 | stephendo
The best shelf life for OSP is run both sides the same day they are opened for the first time. They are good for JIT but I didn't know that they were still good after washing.
Electronics Forum | Wed Apr 13 16:37:26 EDT 2022 | emeto
I had both in time. Both vendors have great machines. Life warranty on blowers, good build quality, good reliability. From this point it will be personal preference on custom details important for you.