Electronics Forum: good printer (Page 3 of 65)

MPM screen printer

Electronics Forum | Fri May 14 12:40:03 EDT 2004 | Kuru

My switch is good, I can check the switch and the two photo sensors on the input test screen. They are turning on and off.I can see it no the board too. When I start up I can see Tactile unit come down so I know pneumatics portion is good. I am still

MPM screen printer

Electronics Forum | Sat Sep 17 14:01:43 EDT 2005 | johnw

Hi all contact the guys at ALTUS GROUP these guys are all experts on mpm printers they are all x MPM service engineers they hold a vast stock of spares also I use these guys all the time and are good to deal with WWW.ALTUSGROUP.BIZ

MPM screen printer

Electronics Forum | Tue Sep 20 04:14:08 EDT 2005 | Rob

Yes, and you ruined all that good work by sending us Billy Ray Cyrus. (Don't think we aren't greatful that we're wearing levi's instead of lederhosen - it's never particularly warm over here!)

Quad/SMTech/MPM 400 printer question

Electronics Forum | Mon Oct 23 19:00:30 EDT 2006 | cadcopac

Have you tried to clean the lens at the tip of the pen? Use alcohol should work like new unless it is defective. Ours was driving me nuts till the brainwave hit and has been working ever since. Good luck. John

ASM Dek printer

Electronics Forum | Fri Apr 26 12:47:07 EDT 2019 | bane016

Good day, I need to turn on option before start printing to aprove by 2D code stencil and type of paste. I don't know exactly how to turn it on that option on machine. I have 2D and barcode scanner. Thanks in advance for help.

screen printer from MPM

Electronics Forum | Fri Feb 06 15:52:18 EST 2004 | pjc

SPM is superior in terms of technology and application. SPM has larger print area, up to 20� x 19", vs. 17.7� x 15.7� for the MicroFlex. MicroFlex is microprocessor controlled while the SPM has a PC. SPM can print down to 12mil (0.3mm) fine pitch no

screen printer comparision

Electronics Forum | Thu Apr 15 16:13:13 EDT 2004 | pjc

Best recommendation is to compare the two machines with your boards and stencils. Either vendor should be able to arrange for a �test drive� at one of their demonstration facilities or at a local friendly customer. I�m afraid that your request for �o

Ekra X3 printer

Electronics Forum | Thu Aug 11 15:10:27 EDT 2011 | wrongway

Hello 1036 we have a Ekra X5 machine the parts might be in Germany but the tech support is some of the best i have delt with we have been using it 2 shifts 5 days a week for 6 years now we have had a few issues but nothing that I would'nt expect goo

screen printer - vision

Electronics Forum | Thu Apr 29 10:49:05 EDT 2004 | pjc

Yes, using an illuminated magnifing glass helps. How well your board fixuring is on the table will effect print alignment on other boards loaded. 0.5mm & 0.4mm will require very good fixuring, like you can get with tooling pins if the board has non-p

MPM screen printer

Electronics Forum | Thu May 13 23:01:07 EDT 2004 | fastek

Unplug the tactile sensor and check the switch with an ohm meter. If the tactile sensor switch is good go in one of the drawers in the back of the machine and with the help of your schematics find the opto-module that controls the tactile sensor circ


good printer searches for Companies, Equipment, Machines, Suppliers & Information

Global manufacturing solutions provider

High Precision Fluid Dispensers
Blackfox IPC Training & Certification

Wave Soldering 101 Training Course
SMT feeders

Best Reflow Oven
High Throughput Reflow Oven

Nozzles, Feeders, Spare Parts - Siemens, Fuji, Juki, Yamaha, etc...
PCB Depanelizers

Low-cost, self-paced, online training on electronics manufacturing fundamentals