Electronics Forum: grab error (Page 1 of 2)

MyData F-MOT MOVESLOWMOVE HYDRA error

Electronics Forum | Tue Apr 02 14:56:30 EDT 2024 | kingkelvin

Hi all - my problem is a bit worse now - I can get all hydra tests to pass in extended service, except indicator levels at current 7 a bit high past 190 limit at ~210-220 - other than that hydra bank re-installs OK - but still it makes a bad hitting

MPM Accuflex "USC park failed" error during initialization

Electronics Forum | Tue Feb 01 19:02:48 EST 2022 | proceng1

USC PArk is your underside stencil cleaner. The camera pushes it back and a magnet grabs it and holds it back. Ours did this many years ago. I pulled the rear cover and initialized the machine, when the camera pushes the stencil back, grab it and

Mydata (MY12) error-Frame Grab and Light Curtain

Electronics Forum | Fri Sep 25 13:09:42 EDT 2009 | rmitchell

Thanks to those that responded. I eliminated the light curtain problem. The metal plate the light curtain pcb bolts to was bent. I had it aligned in our machine shop and it worked properly. I forgot to mention the error was pooping up with no fee

Mydata (MY12) error-Frame Grab and Light Curtain

Electronics Forum | Tue Sep 29 13:59:08 EDT 2009 | cyber_wolf

The Hydra camera is a linescan camera on our machine.

Mydata (MY12) error-Frame Grab and Light Curtain

Electronics Forum | Sat Sep 26 21:45:37 EDT 2009 | casmt

It didn't see the ref points on the bottom of the hydra head. start by checking the camera for dirt or dropped parts. Is it a hydra camera or Linescan?

Mydata (MY12) error-Frame Grab and Light Curtain

Electronics Forum | Sat Oct 03 07:26:01 EDT 2009 | cflames17

Check the reference plate on the hydra to make sure it is not cracked or delaminated. I have had problems with the glue coming loose and the plate flapping causing this same problem. check hydra camera calibrations, this to may help.

Mydata (MY12) error-Frame Grab and Light Curtain

Electronics Forum | Tue Sep 22 16:39:10 EDT 2009 | rmitchell

Hi, We are getting a E-Hydra-1 Frame grabbing failed on caps and resistors and also a Light Curtain trigger X wagon. I spoke with mydata and they indicated the light curtain might be getting set off and causing the frame grabbing failure. I cleane

Tp9 and Tp9 ufp

Electronics Forum | Tue Oct 25 15:03:48 EDT 2011 | sjs2303

Hi Bert, For your second issue, are the tools well lubricated? If not the Midas head can fail to grab the tool and can generate the z motor error. Doing this followed by a base-centre level measurement should resolve your problem. Steve

Mydata (MY12) error-Frame Grab and Light Curtain

Electronics Forum | Wed Sep 23 08:17:46 EDT 2009 | kpm135

I've run into mysterious light curtain errors before and what was happening was when the head moved across the top of the components one of the clear tape covers would flutter up and trigger the curtain then it would settle back down on top of the ta

Mydata (MY12) error-Frame Grab and Light Curtain

Electronics Forum | Wed Sep 23 08:19:52 EDT 2009 | rgduval

Check to see if there's a loose cable, or something, that's randomly setting off the light curtain. We occasionally have that problem with some of our flex or 12/16 mags in our TP9, where the tape take up clip is loose (nothing in that feeder) and i

  1 2 Next

grab error searches for Companies, Equipment, Machines, Suppliers & Information

Selective Soldering Nozzles

Training online, at your facility, or at one of our worldwide training centers"
High Throughput Reflow Oven

High Resolution Fast Speed Industrial Cameras.
SMT feeders

Nozzles, Feeders, Spare Parts - Siemens, Fuji, Juki, Yamaha, etc...
SMT feeders

Software programs for SMT placement and AOI Inspection machines from CAD or Gerber.
design with ease with Win Source obselete parts and supplies

Private label coffee for your company - your logo & message on each bag!