Electronics Forum | Fri Mar 06 22:12:56 EST 2020 | portersmt
Is there any recommendation you'd have when adding grease - how many pumps into the grease adapters would you do? Should you visually see the grease coating the entire ball screw / LM rail?
Electronics Forum | Fri Mar 06 02:25:08 EST 2020 | bukas
it is not that big deal. you can use almost any generic grease. I use SKF bearing grease on CP45FV's. Just make sure you remove old grease, I use IPA and compressed air to do this. And don't put too much of it or too little. After greasing everything
Electronics Forum | Tue Nov 22 09:38:12 EST 2011 | daxman
Good morning everyone, We're whipping our maintenance into shape. For starters, we've acquired the proper lubricants for our Fuji machines. Most of the lubricants (AFC, LRL-3, Daphne EP2) come in accordion/bellows style grease tubes. This isn't a p
Electronics Forum | Tue Aug 23 14:23:18 EDT 2005 | Just a Viewer
Your machine manual should have a list of grease and oil... if not contact machine manufaturing for details.
Electronics Forum | Wed Jul 29 02:53:09 EDT 2009 | meritajs
You could use SHELL ALVANIA GREASE EP2 or other vehicles solid greases
Electronics Forum | Tue Sep 19 11:27:29 EDT 2006 | lheiss
We just purchased a Converted 4c and I've noticed that the linear bearings have what appear to be grease fittings on them. There is also a significant amount of what appears to be automotive type grease on the slides. The X axis got stuck and I cle
Electronics Forum | Fri Apr 20 00:02:11 EDT 2007 | Haris
Hi all, Recommended grease for Yamaha YV 100Xg is NSK grease NSL but i have a problem to find its direct supplier. thanks.
Electronics Forum | Thu Sep 13 11:01:39 EDT 2007 | cyber_wolf
Fuji specs out Omega 66 grease for the solenoid sliders on older CP machines. These solenoids run hot. Its interesting to me that this grease is designed for extremely low temperature applications. Whats up with that ? http://www.omegaoil.co.jp/ind
Electronics Forum | Wed Sep 10 15:37:09 EDT 2008 | djmic
I just purchased a soldering station and it came with the silicone grease for the desoldering gun and say's for cleaning spring filter and filter pipe, now do I just smooth this grease all over the spring and tube the spring goes in?
Electronics Forum | Tue Sep 19 14:52:40 EDT 2006 | bobpan
Grease every 2-6 months depending on the hours used. Dont overgrease.....and make sure you wipe off all excess grease after lubing because the grease always tends to get into the horseshoe sensors and then you will get motor error 4's untill you die!
