Electronics Forum | Fri Dec 10 16:32:55 EST 1999 | John Thorup
well... it depends on what you are placing. Many odd-form placement machines, like Chad or Jot, use some sort of mechanical gripper as a "nozzle" without vacuum. John Thorup
Electronics Forum | Sun Oct 02 19:20:28 EDT 2022 | linux
the info you require comes with the nozzle when you purchase it from panasonic. what's the nozzle number. is it gripper or vacuum.
Electronics Forum | Wed Jun 05 15:15:37 EDT 2019 | cristian_amlima
Hi Guys.. greetings! I hope someone could help me. Does anyone knows how to configure a gripper nozzle to juki 700 series? (more specifically FS730). With this nozzle the machine should blow to inflate the nozzle and I don't know how to change from
Electronics Forum | Wed Dec 17 09:04:19 EST 2003 | Kev
Not a europlacer user, but on our Philips Gem, we use a gripper nozzle for the upright molex conn. We found that using a standard vac nozzle negated both the speed of travel from feeder to PCB and the placement accuracy, as the connector moved on the
Electronics Forum | Sun Mar 24 16:53:44 EST 2002 | mikestringer
We place a similar square pin style of connector on one of our products. The connector is a 22mm high HW series from Samtek. We have a Yamaha YVL88 MK1 and YV88XS set up to handle them (Yes they are rebadged as Philips machines in some markets). No
Electronics Forum | Wed Mar 20 07:14:10 EDT 2013 | vinitverma
Assembleon AX201 is one of the most accurate odd-form placer. It can place anything, including leaded transformers, press-fit connectors, and of course odd form SMT components. You can even use a gripper nozzle for components without a flat surface t
Electronics Forum | Fri Sep 01 11:55:27 EDT 2023 | tommy_magyar
In my previous job we fitted these connectors with bespoke gripper nozzles (ASM/Siplace) from bespoke trays made for these due to the high volume. It also reduces the risk of damaging the component further in case of a reject. However, at my current
Electronics Forum | Wed Mar 20 15:01:37 EDT 2024 | linux
Reboot usually does the trick, Reason for these fault, (1) Nozzle holder, the grippers are holding the nozzle too tight, stretch the spring slightly, (2) shaft is sticking, removed the head lubricate the shaft.(3) Nest not opening and closed within t
Electronics Forum | Fri Feb 01 07:38:38 EST 2019 | scotceltic
What do people recommend for PCBA Depanelers/routers. Need to have the following: Inline China support (Shanghai area), Chinese language capable, Grippers/vacuum nozzles to pick individual boards from panel to designated area. Thanks
Electronics Forum | Fri Jun 16 17:52:30 EDT 2023 | daniel_stanphill
I have a catalogue from December 2022 of their spare parts and accessories and on page 20, Midas head Special tools, there are gripper nozzles but nothing that has that type of extra rotation to allow for what you are describing. It does say that ot
.gif)
.gif)
.png)
winsouce.jpg)