Electronics Forum | Fri Jan 12 08:41:12 EST 2007 | geb
Hi, Our GSM1 pick and place machine has an Axis head 2 Z velocity error. None of the spindles of Head 2 work during placement and it brings up the error message. It will not proceed after that. I have tried lowering and raising the spindles in the
Electronics Forum | Mon Jan 15 11:12:08 EST 2007 | jaimebc
I've had experienced this issues here with our GSM's Flex heads. Try this: 1.- Clean your linear scales with alcohol and a lint free cloth. Both the X and Y. This one has fixed the majority of our errors when one of the heads just stops for no apare
Electronics Forum | Tue Sep 29 09:39:02 EDT 2015 | rgduval
Hey, David, For service, check out 4TechUSA over in Detroit. It's not Chicago, but, you're closer to Detroit up there than I am down here in Houston :) For your issue....do you have access to the UIC Knowledge Base? The first issue I found in the
Electronics Forum | Thu Oct 09 17:37:58 EDT 2014 | rgduval
Got a failure while starting up our GSM, and hoping you guys have an easy fix that we're not seeing. We're getting a Timeout waiting for nozzle changer vacuum buildup. It seems to be occurring on head 2, during nozzle change. We've reseated all of
Electronics Forum | Wed Jun 15 22:27:40 EDT 2011 | pkamath2
Hello, My company recently installed a Positive Displacement Pump on a GSM Pick @ Place machine for dispensing chipbonder (loctite 3621) dots before mounting chip components. The head uses Universal stand nozzles (single port-small dot, dual port 0
Electronics Forum | Fri Oct 10 16:23:59 EDT 2014 | dilogic
First, plug all holes with nozzles or plugs. Then use I/O diagnostics to fire changer up and activate vacuum. Then try to remove each of the nozzles and see if the vacuumm holds. If it does, check vacuum detector switch (mounted on changer side). The
Electronics Forum | Mon Oct 13 09:22:14 EDT 2014 | rgduval
Deni, Thanks. I managed to do pretty much exactly that. I was able to get the changers to pop up, and check the vacuum on the nozzles. The first two nozzles are very well sealed into the changer (can't move them), but, the balance of the nozzles
Electronics Forum | Mon Oct 20 10:08:42 EDT 2014 | rgduval
Had someone in from the broker that we bought this machine from, and he did some poking around. We've learned some things, but, unfortunately, are still no closer to getting the machine running :( We discovered (based on double checking other machi
Electronics Forum | Fri May 24 11:46:34 EDT 2002 | tmv
Lot's of good discussion in this string...but I think we've missed a few points. First off...turret machines are more than capable of handling the smaller component sizes (in fact, they are the best)...Machines like the SANYO TCM-3000 or Universal 47
Electronics Forum | Tue Jul 26 09:48:44 EDT 2016 | leeg
Have you taught the tray position in correctly, I dont know that particular machine but you normally teach in 3 positions. When you have done this have you re-optimised?
