Electronics Forum | Thu Aug 28 04:31:22 EDT 2014 | jana
Thanks for the reply. So a mix of two images is made by optics(2 prisms) and ONE camera shows the result? Or there are two cameras and a mix of two images is made in video mixture device?
Electronics Forum | Mon Aug 28 17:00:53 EDT 2006 | flipit
I used to get about 4 years out of a GSM camera. The entire assembly from UIC used to be about $10,000.00. And yes that does equal a machine calibration.
Electronics Forum | Mon Mar 03 12:25:37 EST 2008 | daxman
The problem was first noticed while doing a nozzle center. The wide angle camera would not display an image. After rebooting the machine (sometimes it took several tries) the camera would work. A few months later, the wide camera would not boot at a
Electronics Forum | Tue Jun 23 10:39:53 EDT 2015 | robie69
I've read through an old Mirtec thread and in it a couple of guys mentioned that they have issues with their side view camera(s). I'm currently having issues with both of mine, where the image will become blurry, and it will add purple lines to the
Electronics Forum | Thu Aug 13 16:08:01 EDT 2015 | capse
I don't believe the lighting and camera have the same power supply. You have no image. The likely issue is the camera power supply of the camera itself.
Electronics Forum | Wed Aug 23 12:41:35 EDT 2006 | chrisgriffin
On the camera lens, there should be a ring to adjust aperature and one to adjust the focus. Sometimes an extension piece is needed between the camera and the lens.
Electronics Forum | Mon Jan 29 15:21:56 EST 2007 | flipit
If you teach your feeders, you can no longer gang pick correct? I have never had a dual beam or dual head GSM before. However, if you teach feeders with the fiducial camera and your picks are still off, there is an offset in one or several spindles
Electronics Forum | Thu Apr 01 14:41:39 EST 2004 | azdback
Make sure that the image of the component in matches the way the actual part is on the feeder. To do this just go to your feeder status on the production screen, then click on the feeder that you want, in this case the one that has the sot-63 and now
Electronics Forum | Thu Dec 21 16:56:03 EST 2000 | lucky
I do not think so. The 54 mm has a large field of view, so when it looks at small parts the image is blurry. What you want to try is using the other camera (camera 2) it has a 38mm field of view. Camera 2 is considered a narrow field of view, the cam
Electronics Forum | Thu Jan 11 14:27:30 EST 2007 | gregcr
I worked for a similar company. They had 4 GSM's. Most all of the GSM's software have a fairly straight forward way of importing data, it is just a matter of formating it correctly. I can't imaging using calipers to make a GSM placement program if