Electronics Forum | Thu Sep 02 11:44:37 EDT 2010 | swag
No, red light should be what you see from a PEC.
Electronics Forum | Wed Apr 26 01:59:01 EDT 2023 | ttheis
Thanks, what about the camera calibration? Does it use the same kit as the GSM machines?
Electronics Forum | Wed Feb 06 02:05:17 EST 2013 | dman97
Does anyone know what causes a pink vision screen on a GSM-X running on OS/2? All the cameras turn on when run on a dry cycle but the vision monitor never turns on. It just shows a pink screen. I checked all the connections on the VME cards and ca
Electronics Forum | Fri Jul 15 13:56:18 EDT 2005 | chunks
Here's an easy one. Make a camera that looks up at the board a non-mirror image. You could keep the mirror image toward the stencil since stencils rarely have any legend on em.
Electronics Forum | Fri Oct 17 04:23:51 EDT 2008 | fujiphil
Check the image using the fast inching [F] and axis selection [2]. After vision error, press [F] then [2]. The monitor will display a binary images. You will now have a visual look on how the error occurs. Adjust the CCD level of the camera until you
Electronics Forum | Mon May 07 09:46:15 EDT 2001 | orbotech
3D imaging refers to the acquisition of images from multiple perspectives using, preferably, multiple sources of illumination, while 2D imaging refers to the acquisition of an image from one perspective. An AOI system with 3D imaging is able to acq
Electronics Forum | Mon Aug 20 07:31:26 EDT 2007 | dilogic
We have GSM1 running on USOS V1.4.14. Is there a way to change default light levels for PEC (down looking camera) during feeder teach? Whatever I tried, it is always set to some default level... - Dejan
Electronics Forum | Mon Dec 08 14:11:14 EST 2008 | comatose
We run a bunch of .5mm qfn on a GSM1 with a 2.6mil camera, from 16 pad to 100 pad. Works like a charm. We call them a PLCC.
Electronics Forum | Mon May 06 02:30:25 EDT 2002 | dszeto
We have continual vision process error 1CB02003 on narrow view camera during nozzle centering measurement. The wide view camera works properly. So far we have done the following things to rectify the problem but the problem still exists: 1. Replac
Electronics Forum | Fri Sep 09 06:08:39 EDT 2005 | geb
I think it may be the card thats causing the problem. When both machines are set to display a live image, the faulty machine shows pink/red. When their cables are pulled out of the card the working machine shows grey/noise and the faulty machine stay
