Electronics Forum | Sat Mar 09 16:14:41 EST 2013 | dilogic
Machine -> Configuration -> Parameters -> Setup then go to vision setup page, if available. - Dejan
Electronics Forum | Mon Mar 04 19:05:44 EST 2013 | jaimebc
Deni, it is a 630 and there is text in the window, just no image of the component or anything else that is brought to the camera. It doesn't time out at all, it just moves the way it would when inspecting a component on test mode.
Electronics Forum | Fri Mar 01 10:45:54 EST 2013 | jaimebc
We currently have a problem with our Universal GSM 2. A part ins presented to the front or back camera but there is no image of the component. Just a dark screen, even though the light system is working. Any ideas on what the problem may be? I suspec
Electronics Forum | Sat Mar 02 18:02:26 EST 2013 | dilogic
Which vision does your machine have? I guess it is Lantern 630 or 640? Is there any text in the vision window after boot? regards Dejan
Electronics Forum | Wed Sep 21 15:13:08 EDT 2011 | gregcr
Where are you located? Along the same lines, I have a trick I used a couple times when replacing a camera. It is often not the image sensor that goes bad, but the camera electronics behind the sensor. I have had luck taking the camera apart but le
Electronics Forum | Tue Jun 23 10:39:53 EDT 2015 | robie69
I've read through an old Mirtec thread and in it a couple of guys mentioned that they have issues with their side view camera(s). I'm currently having issues with both of mine, where the image will become blurry, and it will add purple lines to the
Electronics Forum | Thu Dec 21 16:56:03 EST 2000 | lucky
I do not think so. The 54 mm has a large field of view, so when it looks at small parts the image is blurry. What you want to try is using the other camera (camera 2) it has a 38mm field of view. Camera 2 is considered a narrow field of view, the cam
Electronics Forum | Sun Feb 11 12:12:48 EST 2007 | dilogic
Just out of curiosity - is it possible to enter placement positions in interactive mode (using camera image) on the GSM1 series? - Deni
Electronics Forum | Tue Feb 27 12:43:43 EST 2001 | gsmguru
I've used an on-axis camera lighting for other components with a good deal of success. (But not for CGA's in particular) I would think it should work pretty well for a CGA application. I've done some pretty odd looking parts with this type of lightin
Electronics Forum | Wed May 18 19:14:05 EDT 2022 | proceng1
You can see the nozzle is much wider than the part. It's possible that the camera is picking up the nozzle as part of the outline. Do you have the option to see the BINARY image?
