Electronics Forum | Tue Mar 14 15:02:58 EST 2006 | bigdaddysoy9
You can try swapping cards 10 and 11 in your "General Purpose I/O Chassis", which is the front center panel of the machine. Make sure you change the jumper configurations before you swap them. If the interlocks start working, but your beacon lights q
Electronics Forum | Mon Oct 13 11:18:37 EDT 2014 | dilogic
parameters -> axis that z axis for head2 is also enabled ("axis mounted" must be 1)
Electronics Forum | Tue Jan 29 07:54:47 EST 2019 | anonymus
Hi, I have GSM2 UIC machine, machine does complete zeroing successfully but without scanning feeder plate fiducials. I enabled feeder plates (rear and front), but the problem is identical. Can anyone pls help me?? Thanks
Electronics Forum | Fri Feb 19 11:13:02 EST 2016 | ttheis
I'm setting up a product for the first time on my GSM after I completed debugging some other issues. The previous owners had the PWC axis disabled and the axis motor disconnected, so I re-connected it and enabled it and now it homes and moves. When I
Electronics Forum | Thu Jul 13 02:06:51 EDT 2006 | mika
bypass every pattern steps except 1 of them; the one step that calls for Head# 1 Now start with the first spindle on that head > for ex. no. 1 > save > load the new pattern in Dry cycle!!! > Run/Start. The reason for bypassing the fiducial check i
Electronics Forum | Wed Aug 12 18:06:33 EDT 2015 | bnorton
Here's the end of Logicomm capture on Force COMM2 where it starts the Lantern system not active messages. Couldn't get attach to work. Startup and earlier .ldx file loading omitted ulLoadTasks(): Opening the RFS pseudo device driver ... ulLoadTas
Electronics Forum | Mon Oct 20 10:08:42 EDT 2014 | rgduval
Had someone in from the broker that we bought this machine from, and he did some poking around. We've learned some things, but, unfortunately, are still no closer to getting the machine running :( We discovered (based on double checking other machi
| 1 |
