Electronics Forum | Fri Feb 21 09:55:47 EST 2014 | alpha1
I'm in the market for some new (to me) pick and > place equipment, and, could use some > opinions. > > I'm a MyData guy by experience, and > have recently been working on some older Philips > machines. > > I'm comfortable on a MyData > platf
Electronics Forum | Thu Jun 03 15:15:09 EDT 1999 | J.S.
| I am currently sourcing equipment to mount CSP devices. I have looked at the GSM Flexjet & also the Siemens 80 F series. However these machines only look for ball presence not ball deformation. Panasonic are the only ones who have a 3-D camera capa
Electronics Forum | Wed Apr 07 18:47:23 EDT 2004 | pdeuel
Thanks to all of you. As it turns out,(pun), the problem was with optimization. The SOT-63 Was being picked with other parts also set to pre orent when orignally this part was not. The program was then optimized. The other parts on the other heads ca
Electronics Forum | Thu Apr 01 12:26:05 EST 2004 | russ
Are the parts coming out of the same reel?
Electronics Forum | Fri Apr 02 15:41:38 EST 2004 | azdback
You may also want to start on the component library. Hypotetically speaking, the GSM shows the component as follows in the component library: One lead to the right, 3 leads to the left. This is the feeder default orientaion and it will be 0 degrees.
Electronics Forum | Thu Apr 01 14:41:39 EST 2004 | azdback
Make sure that the image of the component in matches the way the actual part is on the feeder. To do this just go to your feeder status on the production screen, then click on the feeder that you want, in this case the one that has the sot-63 and now
Electronics Forum | Fri Apr 02 02:59:22 EST 2004 | paul pmd
Yes, The feeder graphic shows the leads at 180 degrees. The part is in the reel at 180 degrees when feeder is mounted on front side. The component graphic has the leads at 0 degrees. All parts are comeing from the same reel.
Electronics Forum | Wed Mar 31 21:57:21 EST 2004 | pdeuel
Minor problem with rejected parts on a GSM C4 single flex head. UIC support was helpfull but I thought some of you may have encountered this problem and know what's the matter. We are rejecting 1 out of 3 SOT-63 parts. The problem is occuring to part
Electronics Forum | Fri Apr 02 09:01:38 EST 2004 | azdback
One thing that it doesn't make sense, I have never seen the GSM picking up one component leads down, present it to the camera leads down and reject it. Just so it can pick two more components from the same reel and present it leads up and accept it.
Electronics Forum | Fri Aug 08 18:06:35 EDT 2003 | davef
Antistat sprays are a waste of time and money. These sprays just soaps disolved in water that absorb moisture from the air. Your minimum requirements: Conductive floor mats and wrist straps that are properly grounded. From there, consider using
