Electronics Forum | Mon May 04 09:18:18 EDT 2020 | ilavu
Also, Check jumpers on 9pin connectors at front, rear and both side. If anyone missing or broken, will do the same.
Electronics Forum | Fri May 01 15:35:03 EDT 2020 | travishemen
I'm not sure if these are similar to our Genesis machines but if they have removable feeder banks they are part of the safety circuit. If they are not installed or if the sensors on them are misaligned it will show the same as an interlock violation
Electronics Forum | Thu Apr 30 17:06:19 EDT 2020 | bboyer
So, I have inherited a couple of "vintage" GSM1 machines, and we've got one powered up, trying to see if it even works, before registering the machine and paying Universal some money. It appears several of the safety interlock switches are triggered
Electronics Forum | Mon Jan 15 11:12:08 EST 2007 | jaimebc
I've had experienced this issues here with our GSM's Flex heads. Try this: 1.- Clean your linear scales with alcohol and a lint free cloth. Both the X and Y. This one has fixed the majority of our errors when one of the heads just stops for no apare
Electronics Forum | Tue Mar 14 15:02:58 EST 2006 | bigdaddysoy9
You can try swapping cards 10 and 11 in your "General Purpose I/O Chassis", which is the front center panel of the machine. Make sure you change the jumper configurations before you swap them. If the interlocks start working, but your beacon lights q
Electronics Forum | Thu Sep 02 10:50:21 EDT 2010 | eezday
I'm bringing a GSM-1 machine at a university back to operational condition. I have a project created and I'm experiencing that when it's loaded the PWC goes to a location that is about two inches too narrow. When the PWC is manually told to go to a
Electronics Forum | Fri Jan 01 10:17:49 EST 2010 | jeffreyj
Long time no update. We ended up buying a used Quad IIc for something like $2500 + shipping - no kidding - through CAE. They originally wanted $5,200 but they wouldn't commit to saying it was operational and we wouldn't commit to buying it if they di
| 1 |
.gif)
winsouce.jpg)